To 3.5" Drive Tray Device Installation - Thermaltake Armor-VA8000SWA User Manual

Squeeze and push in-ward the tool free clip to secure the
12 cm fan cage.
Replace back the 3 drive bay covers previously removed
2.5 Installing 3.5" HDD
Squeeze and pull out-ward
the tool-free clip at desired
slot.
Secure HDD by tightening
screw to HDD
7
( For 12cm Fan Cage )
Insert HDD by sliding HDD
into the 12 cm fan cage.
Squeeze and push in-ward
the tool free clip to secure
the HDD in the 12 cm fan cage.

2.6 5.25" to 3.5" Drive Tray Device Installation.

Squeeze and pull out-ward the tool-free clip securing the drive tray
Remove drive bay cover in front of the drive tray. Then slide out
the device tray.
Insert HDD drive into device tray. Secure HDD with screw from the
side of device tray labeled HDD.
Insert back the device tray and replace back the
drive bay cover.
8
User's Maunal