Installing 3.5" Device To Drive Tray With Power Button - Thermaltake Armor-VA8000SWA User Manual

Installing Floppy Disk Drive to Device tray
Remove device tray and insert floppy disk drive into
device tray. Secure FDD with screw from the side of
device tray labeled FDD.
Insert back device tray. Remove mesh on drive bay cover.
Then replace back drive bay cover. Squeeze and push
in-ward the tool free clip to secure the device tray
9
Squeeze and push in-ward the
tool free clip to secure the
device tray.
2.7 Installing 3.5" Device to Drive Tray With
Power Button
Squeeze and pull out-ward the tool-free clip securing the
drive tray with power button. Remove and slide drive bay
out-ward to remove.
Remove mesh from cover
Squeeze both top and bottom
portion of drive tray cover picture
to the left to remove cover.
User's Maunal
10