Thermaltake VG400LBWS Installation And Operation Manual

Thermaltake VG400LBWS Installation And Operation Manual

Xsase vi lcs vg4000 series

Advertisement

Quick Links

01
English
Contents
Chapter 1. Product Introduction
1.1
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
3.1
3.2
3.3
3.4
3.5
4.1
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
This time, don't let Xaser VI slip away !
Chapter 1. Product Introduction
Specification
02
03
03
04
05
06
06
07
Model
08
Case Type
10
11
Dime nsion (W*D*H)
12
Window si de panel
14
Sli ding mo therbo ard tray
15
Cable ma nag ement
15
Sli ding hood
15
Adjustable PSU bri dge
16
Material
Color
17
Cooli ng System
18
19
20
Mothe rboa rds
22
Drive Bays
22
-5.25" Drive Bay
-3.5" Drive Bay
-3.5" Drive Bay (Hidd en)
Fron t I/O
23
Exp ans ion Sl ots
25
26
Liquid Cooling
27
System Applicati on
37
38
39
39
42
43
45
VG400LBWS
VG400LBNS
VG400LSWA
Super Tower
250 x 660 x 605 mm
9.8 x 26.0 x 23.8 inch
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Front door: Aluminum / Chassis: 1.0mm SECC
Chassis color: Black / Metal mesh : Red
Chassis color : Silver / Metal mesh : Black
- Front (intake) : 140 x 140 x 25mm blue LED fan, 1000rpm, 16dBA or 120 x 120 x25 mm fan (optional)
- Rear (exhaust) : 120 x 120 x25 mm blue LED fan, 1300rpm, 17dBA
- Top (exhaust) : 140 x 140 x 25mm TurboFan, 1000rpm, 16dBA or 120 x 120 x25 mm fan (optional)
- Bottom (intake) : Two 140 x 140 mm fans (optional) or two 120 x 120 x25 mm fan (optional)
- VGA (intake) : 140 x 140 x 25mm TurboFan, 1000rpm, 16dBA or 120 x 120 x25 mm fan (optional)
9.6" x 9.6" (Micro ATX), 12" x 9.6" (ATX), 12" x 13" (Extend ATX)
7 (3 occupied by LCS module)
1 (Convertable from one 5.25" drive bay)
7
e-SATA connector x 2, USB2.0 x 4, IEEE 1394 Firewire x 1, HD Audio
10
- Three 5.25 Drive Bay design: liquid cooling system built inside
- Quick Disconnect Connector: Automatic non-spill valves, robust material one hand operation
- Performance Motorsports radiator:
(A) Dimension of radiator : H 153 x W 120 x T 28 mm
(B) Adjustable 120mm blue LED silent fan (1600~2400RPM)
- P500 liquid pump : Powerful DC 12V liquid pump (500L/hr)
- All copper water block: For Intel P4 775/478 and AMD AM2/K8
- Flow TX: Flow meter for liquid cooling system
- Reservoir: Contains 320 c.c. of liquid capacity
- Water tube: Transparent UV tube (3/8") ,
industrial-grade rubber tube (3/8", pre-assembled)
Xsase VI LCS
VG4000 Series
English
02
VG400LSNA
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
All Aluminum

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VG400LBWS and is the answer not in the manual?

Questions and answers

Summary of Contents for Thermaltake VG400LBWS

  • Page 1: Table Of Contents

    How to Open the Side Panel -Open the left-hand side panel -Open the right-hand side panel 5.25" Device Installation -How to remove 5.25" device? -How to put back the 5.25" drive bay cover? VG400LBWS VG400LBNS VG400LSWA VG400LSNA 3.5" Device Installation Model...
  • Page 2: Chapter 2 Case Mechanical Operation

    English English Chapter 2 Case Mechanical Operation 2.1 How to Open the Side Panel Open the left-hand side panel Open the right-hand side panel To remove the left-hand side panel, please remove upper and bottom To remove the right-hand side panel, screws on the back of the case.
  • Page 3: Device Installation

    English English 2.2 5.25" Device Installation How to remove 5.25" device? Pull the right-hand side of the lever to remove the 5.25" device. Remove the 5.25" drive bay cover as shown. How to put back the 5.25" drive bay cover? Put 5.25"...
  • Page 4: Device Installation

    English English 2.3 3.5" Device Installation 2.4 HDD Installation Place 3.5" device on the tray and fasten it using the screws provided. Remove the HDD tray by pressing the handle and pull the tray out. Slide the drive device into the bay and secure the tray by 5.25"...
  • Page 5: How To Remove The Hdd Cage

    English English 2.5 How to Remove the HDD Cage Slide the HDD tray back to the drive bay. Unscrew the thumb screws of the cage. Press the handle to lock the HDD tray. Push the handle down and pull the cage out. Organized HDD cable management.
  • Page 6: Pci Slot Tool-Free Usage

    English English 2.6 PCI Slot Tool-Free Usage 2.7 Power Supply Installation Release the plastic clip as shown. Take off both side panels and unscrew the thumb screws from Take off the PCI bracket. both side of PSU supporting bridge. Locate Graphic Card to the motherboard through fixing it on the space of PCI bracket and insert it to the PCI slot.
  • Page 7: Sliding Motherboard Tray

    English English 2.8 Sliding Motherboard Tray Adjust PSU supporting bridge to the appropriate position. Remove both side panels before removing motherboard tray. Remove the screws from the back of the chassis. Fasten both side of PSU supporting bridge using the thumb screws. Slide the motherboard tray towards the back of the case to remove it from the case.
  • Page 8: How To Open Top Sliding Hood

    English English 2.9 How to open top sliding hood 2.10 Swappable HDD Module/ Fan Module (Optional) Top sliding hood Remove screws from the top Lay down your case and unscrew sliding hood. the thumbscrews to remove the HDD cage The top sliding hood allows easy LCS maintenance.
  • Page 9: Vga Fan Installation

    English English Chapter3 Motherboard & Leads Installation 2.11 VGA Fan Installation 3.1 Motherboard Installation Each motherboard has different standoff layout. It is highly suggested that you refer to your motherboard's manual when installing motherboard into the Case. Xaser VI is applicable with Extend ATX, ATX &...
  • Page 10: Case Led Connection

    English English 3.2 Case LED connection 3.3 USB 2.0 & IEEE 1394 Firewire Connection USB connection Please consult your motherboard manual to find On the front of the case, you can find some LEDs and switch leads out the section of "USB connection". (POWER SW*1, POWER LED*1, H.D.D.
  • Page 11: Audio Connection

    English English 3.4 Audio Connection Please refer to the following illustration of Audio connector and your motherboard IEEE1394 Firewire connection user manual. Please consult your motherboard manual to find Please select the motherboard which used AC'97 or HD Audio (Azalia), (be aware of out the section of "IEEE1394 Firewire connection".
  • Page 12: Chapter4 Other 4.1 Toughpower / Purepower / Tr2

    Furthermore, it has been approved by UL, CUL, TUV, CB, FCC, CE, and BSMI. There are three main products line of Thermaltake PSU which divided into Toughpower, Purepower (include Purepower RX) and TR2 (include TR2 RX) series.
  • Page 13: Components Check

    English English 5.1 Components check 5.2 Installation steps We strongly suggest the following installation procedures. Failure to comply may result in All copper water block leaks and damaged components. For Intel P4 775/478 and AMD AM2/K8 Components check UV sensitive 1000 cc Coolant x 1 Install Waterblock Refill Bottle...
  • Page 14: Install Waterblock

    English English 5.3 Install waterblock 5.3.1 Secure Waterblock onto CPU (Intel LGA 775) Install the Clip on Motherboard Install Waterblock on Motherboard Exploded View Completed View Intel LGA 775 Motherboard Components for LGA 775: A-Metal H-type clip B-Cushion Tear off the tape on C-Insulator the back of the D-50mm screws...
  • Page 15 English English 5.3.2 Secure Waterblock onto CPU (Intel P4 Socket 478) Install the Clip on Motherboard Install Waterblock on Motherboard Exploded View Completed View Intel P4 Socket 478 Motherboard Components for P4 478: A-Metal H-type clip B-Cushion Tear off the tape on C-Insulator the back of the D-50mm screws...
  • Page 16 English English 5.3.3 Secure Waterblock onto CPU ( AMD K8 Socket 754 / 939 / 940 A. Install by back plate for motherboard B. Install by clips bundled in package (Standard installation) Install the Clip on Motherboard Install the Clip on Motherboard AMD K8 Motherboard Remove the...
  • Page 17 English English 5.3. Secure Waterblock onto CPU (AMD Socket AM2) A. Install by back plate for motherboard (Standard installation) Combine the insulator(C) and the cushion (B) Install the Clip on Motherboard using the adhesive. Stick the metal H-type clip(A) with the insulators (BC). Tear off the protective layer to adhere it onto the motherboard.
  • Page 18 English English B. Install by clips bundled in package Combine the insulator(C) and the cushion (B) Install the Clip on Motherboard using the adhesive. Stick the metal H-type clip(A) with the insulators (BC). Tear off the protective layer to adhere it onto the motherboard. Attach H-type clips(including ABC) on the back AMD AM2 Motherboard Components for AMD AM2:...
  • Page 19: Install Water Tube

    English English 5.4 Install Water tube 5.5 Install Quickconn Connecter Insert the hose clips and Remove black rubber caps from male quick connector the waterblock. through the tube. Use pliers to tighten Insert the hose clip through the hose clips. Repeat the the tube.
  • Page 20: Connect The Quickconn Connector

    English English 5.6 Connect the Quickconn connector Connect the Quickconn connector. Turn on the PC power switch. 3U bay liquid cooling system Liquid level will decrease when you power on the system, please keep filling coolant until the tank is filled up. CPU Waterblock Important notice : The coolant should not be up to the high...
  • Page 21: Power On The System

    English English 5.8 Power on the system Adjust the fan speed. Turn on the PC power switch. Turn off the PC power switch. Installation complete. Important Notice : Please pay attention to the following, 1.DO NOT open the cover of liquid tank when system is on.
  • Page 22: Schedule Maintenance

    English English 5.9 Schedule Maintenance Performing scheduled check up for the liquid cooling system will ensure optimal cooling performance! Tubing Pump Ensure pump is working proper Tubing within the system must not be bent. Replace Water Tank tubing if necessary. Tubing Connections Check for water level within the water tank.
  • Page 23: Liquid Cooling Q&A

    A : Yes, there are numerous upgrades available for all different components in PC. Please visit www.thermaltake.com for more information. Q: How do I know if the pump is working? A: Place your hand on the pump.

This manual is also suitable for:

Vg400lbnsVg400lswaVg400lsna

Table of Contents