Summary of Contents for Vacron Mobile Video Recorder
Page 1
2-Channel Mobile Video Recorder User Manual 2013 MAR. V1.1...
Page 2
2-Channel Mobile Video Recorder User Manual Disclaimer This document is deemed accurate at time of writing. Due to continuous hardware and software improvement, images and software screenshots depicted here may be different from the actual products. Improper installation or use may cause hazard such as electrical shock and fire.
2-Channel Mobile Video Recorder User Manual A. Key Features Suitable for motorcycle and small vehicle. Durable, water resistant all-aluminum casting. Up to 2 channel video cameras input. Simultaneous recording of video and audio (with external microphone) ...
2-Channel Mobile Video Recorder User Manual B. Specifications Items Description Video input 2 Channel Frame Size NTSC: 30 fps (D1); PAL: 25 fps (D1) Power Supply DC12V, 250mA Operating -15°C~ 50°C Temperature SD card, 4G or above, class 10 or better.
2-Channel Mobile Video Recorder User Manual C. Product Description Panel Power IR Receiver Recording Screw Protective cover SD card slot Dimension (mm)
2-Channel Mobile Video Recorder User Manual D. Memory Disk Plug the memory disk to recorder: (1) Loose the screw in counterclockwise rotation, and open the protective cover to insert/remove SD card. (2) Tightly close the cover afterward. SD Card NOTE: The memory disk need to be purchased separately Accessing the memory disk from computer (1) Insert the memory disk to the USB reader.
2-Channel Mobile Video Recorder User Manual E. Cables Cables (1) Power connecter, male (2) Channel 1 Video Input* (3) Channel 2 Video Input* (4) External microphone input (5) External GPS antenna input NOTE: Use this device with compatible vehicle cameras Power Cable (1).
2-Channel Mobile Video Recorder User Manual F. Vehicle Installation Warning (1) Please install this device with the help of professional technician to avoid damaging your vehicle. (2) For installation by none-technician, please use tapes instead of boring tools to avoid damaging the electrical and gasoline system.
2-Channel Mobile Video Recorder User Manual G. Remote Controller Playback Manual Recording Split Screen Switch Function - Function + Audio Recording On/Off Speaker On/Off Menu Up, Down, Left, Right Enter Rewind Fast Forward Video Playback Stop playback / Stop playback mode...
2-Channel Mobile Video Recorder User Manual H. Recording There are two modes of recording: Continuous After the device is powered up, it automatically starts recording continuously until it is powered off. Emergency In the event of emergency, the device saves data from 1~3 minutes before and after the event.
2-Channel Mobile Video Recorder User Manual Manual Recording To start manual recording, press the button on the remote controller. The recording indicator (red) will flash at quicken speed to indicate that emergency recording is in progress. G-Sensor Recording When the internal G-sensor detects abnormal shock, the device automatically switches to emergency recording.
2-Channel Mobile Video Recorder User Manual J. Live Display Event Mode Camera 1 Microphone Camera 2 Energy Saving Video 1 Video 2 GPS Information (1) If the screen shows on top right, it means that both channel 1 (left) and channel 2 (right) have video signal. A icon indicates that one channel has no video input.
Page 14
2-Channel Mobile Video Recorder User Manual (3) Press on the remote controller to switch between CH1 full screen, CH2 full screen and 2-split screen display (see below) CH1 full screen CH2 full screen 2-split screen Image (4) Press on the remote controller in LIVE mode to show firmware...
2-Channel Mobile Video Recorder User Manual K. Player Software on PC Run the player software (included in the CD). NOTE: The software requires Direct X version 9.0 or above. Channel 2 Channel 1 Google Map Video seek bar Vehicle speed...
Page 16
2-Channel Mobile Video Recorder User Manual G-sensor Display vehicle vibration as recorded by internal accelerometer. Left and right movement Front and rear movement Vertical movement Control bar Previous File Stop Previous Frame Play Play Backward Next Frame Pause Next File Video backup.
2-Channel Mobile Video Recorder User Manual L. File Backup On the player software, select and the following window will open. To backup video: (1) Select the path of the memory disk...
Page 18
2-Channel Mobile Video Recorder User Manual (2) Select the footage that you want to backup (3) Select the Backup Format: (a) Raw file (.sd) Backup all footage information (video, audio, and GPS data). This player software is needed to open the file (b) AVI File (*.avi)
2-Channel Mobile Video Recorder User Manual M. Configuring the Memory Disk Before using the memory disk, you need to firstly format and configure the disk. For disk formatting, please refer to “Formatting the Memory ” on page To configure the memory disk: (1) Plug the memory disk to your computer (see page 6).
Page 20
2-Channel Mobile Video Recorder User Manual Set the number of frames per Video Frame second. Rate NTSC: 5, 10, 15, 20, 30 PAL: 5, 10, 15, 20, 25 Set the frame size 720 x 480 (NTSC) Video 720 x 288 (PAL)
Page 21
2-Channel Mobile Video Recorder User Manual Turn on/off daylight saving. If this Daylight option is enabled, the device’s LCD Saving Time screen will show “DST” after the time stamp. Audio Turn on/off audio recording. Recording Set when to turn off the screen to...
2-Channel Mobile Video Recorder User Manual N. Video Playback You may play recorded video 1) on the built-in screen or 2) on computer On-Screen Playback Press either button on the remote controller, and the system will switch to playback mode (see below). The device stops recording in the playback mode.
Page 23
2-Channel Mobile Video Recorder User Manual Playback on Computer On the software player, select and the following window will appear: (1) Select the path of the memory disk or a backup file on the hard disk. (2) Double click the desired footage to play the file.
2-Channel Mobile Video Recorder User Manual O. Image Snapshot While playing a footage on the software player, you may take a snapshot of the current frame by selecting . The player will save the file to *.bmp format and open the destination folder: P.
Page 25
2-Channel Mobile Video Recorder User Manual (2) Run the player software (included in the CD). (3) Select to open the disk format window. (4) Select the memory disk (5) Select the Format or Restore button. Troubleshooting (1) Before formatting or restoring, make sure the disk is not locked.
2-Channel Mobile Video Recorder User Manual Q. Player Language Setting The software player supports multiple language interface (11 languages at time of writing). To change the user interface language of the software player: (1) Run the player software (included in the CD).