1. Manuals
  2. Brands
  3. Vacron Manuals
  4. DVR
  5. VDH-DX
  6. User manual

Vacron VDH-DX User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual

VDH-DX
2014 FEB V1.4

Advertisement

Table of Contents
loading

Related Manuals for Vacron VDH-DX

Summary of Contents for Vacron VDH-DX

  • Page 1: User Manual

    User Manual VDH-DX 2014 FEB V1.4...
  • Page 2 H-DX User Manual WARNING  Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine.  Do not touch the power plug or case with wet hands as this could result electric shock.

  • Page 3: Table Of Contents

    H-DX User Manual CONTENTS A. DVR System Operation........................1 1. Front Panel Operation ......................1 2. Operation with Mouse ......................1 3. Remote Controller ........................1 B. DVR System Operation........................3 1. Power ON ............................3 2. Power ON ............................3 3.
  • Page 4 H-DX User Manual 5.4.4 Output Adjust ....................59 5.4.5 AutoMaintain ....................59 5.4.6 Restore ......................... 60 5.4.7 Upgrade ......................60 5.4.8 Device Info......................61 5.4.9 Import/Export ....................61 5.5 Info ............................62 5.5.1 HDD Info ......................62 5.5.2 BPS ......................... 63 5.5.3 LOG ........................

  • Page 5: Dvr System Operation

    H-DX User Manual A. DVR System Operation 1. Front Panel Operation Please refer to Front Panel Instruction in the User Manual in attached disk. 2. Operation with Mouse In LIVE mode: Right click to enter MAIN MENU  Click LEFT Key to enter /select menu operation. ...
  • Page 6 H-DX User Manual Set ID code to control different DVR ENTER Enter / Confirm UI mode: Upper Option Live view mode: control video display page in single  channel, 4, 8, 9 split display. PTZ control mode: UP UI mode: Downward Option Live view mode: control video display page in single ...

  • Page 7: Dvr System Operation

    H-DX User Manual B. DVR System Operation 1. Power ON Make sure power cable is firmly connected, and then turn on the power. The initial process will take around 20 seconds, buzzer sound will be heard when process is finished. The default video display is multiple screen display.

  • Page 8: Display Setup

    H-DX User Manual In the multi- screen, right click the mouse, and a Quick-menu pop up. Select Main Menu or rest functions, key in Account ID & Password to login. Default Value of Account ID: admin, Password: blank. Display Setup Select View 1 for monitoring Single screen, optional CAM01~16 single screen.
  • Page 9 H-DX User Manual Select View 8 for monitoring 8 screens, optional CAM1~8, CAM9~16. Select View 9 for monitoring 9 screens, optional CAM1~9, CAM8~16. Select View 16 for monitoring 16 screens, 16 split screen.

  • Page 10: Main Menu

    H-DX User Manual Main Menu (Figure 1) (Figure 2) Right click the mouse, select Main Menu and it will pop out, as (Figure 1) & (Figure 2). 5.1 Record (Figure 3) ：Select (Figure 2) Record icon, pop out (Figure 3) page.

  • Page 11: Record Conf

    H-DX User Manual 5.1.1 Record Conf (Figure 4) : Select (Figure 3) Record Conf. icon, pop out (Figure 4) page. Channel：Scroll down window to Set the settings for 1Ch or all Ch, default value is channel 1. Redundancy：HDD RAID, when install the 2nd HDD, it is able to activate the disk mirror function.

  • Page 12: Playback

    H-DX User Manual 5.1.2 PlayBack (Figure 5) (Figure 6) ：Select (Figure 3) PlayBack icon, pop out (Figure 5) page.
  • Page 13 H-DX User Manual select date & channels, click play button to Play playback. Pause Pause the video Back Rewind Play Video forward Stop video playback Stop 4 speed options: 1X、2X、3X、4X. Return to Slow normal speed, just click play button once playback again.
  • Page 14 H-DX User Manual Playback selected options; default value is select all. Select this function, click pause button or others to make it active; without selecting this function, only single Channel works. Select more accurate timing for playback, such as 24hr, 2 hr, 1 hr, 30 min;...

  • Page 15: Backup

    H-DX User Manual 5.1.3 Backup : Select (Figure 3) Backup icon, get into (Figure 6) page. (Figure 6) (Figure 7) (Figure 8) ：Plug in USB storage device, click detect to search USB storage which will be shown in window, like (Figure 6). ：Select backup icon to get into (Figure 7) page.

  • Page 16: Alarm

    H-DX User Manual Type：All、External alarm、Motion detection、All alarm、Manual、Normal; default value is All channels. Channel：select which channels need to Backup, optional from Ch1~16; default value is Ch1. Start Time：select what time need to start backup. End Time：select what time to end backup. Remove：Remove selected files.

  • Page 17: Motion Detect

    H-DX User Manual (Figure 11) (Figure 12) 5.2.1 Motion Detect : Select (Figure 9) Motion Detect icon, get into (Figure 10) page. Channel：setup ch1~ ch 16 for individual settings, also can setup for all channels. Enable：Select to setup for the Motion Detect functions; default value is Off. Sensitivity：Set the sensitivity level, from lowest、lower、middle、higher、much higher、highest, 6 options.

  • Page 18: Video Blind

    H-DX User Manual Send Email：Setup to send triggered photos to assigned email address when motion alarm is triggered; default value is Off. Buzzer：Setup for buzzer beeping after motion alarm is triggered; default value is off. FTP Upload：Setup to upload photos to assigned FTP server when motion alarm is triggered.

  • Page 19: Video Loss

    H-DX User Manual Delay: A time period to record after triggering Video Blind, option: 10 ~ 3000 Sec; default value is 10 Sec. Record Channel：select which channel to record after Video Blind is triggered; default value is Off. Tour：Channel pops out after Video Blind is triggered. If select all channels, it jumps from Ch 1 to ch16 in sequence;...
  • Page 20 H-DX User Manual :Select (Figure 9) Video loss icon, get into (Figure 14) page. Channel：setup ch1~ ch 16 for individual settings, also can setup for all channels. Enable：Select to setup for the Video Loss functions; default value is Off. Period：setup the Video Loss from Monday to Sunday, Any 4 days. Alarm Output：According to the settings to trigger Video Loss output;...

  • Page 21: Alarm Input

    H-DX User Manual 5.2.4 Alarm Input (Figure 15) ：Select (Figure 9) Alarm Input icon, get into (Figure 15) page. Channel：setup ch1~ ch 16 for individual settings, also can setup for all channels. Enable：Select to setup for the Alarm Input funtions; default value is Off. Type: Setup Normal open or Normal close;...

  • Page 22: Alarm Output

    H-DX User Manual FTP Upload：Setup to upload photos to assigned FTP server when Alarm Input is triggered. 5.2.5 Alarm Output (Figure 16) ：Select (Figure 9) Alarm Output icon, get into (Figure 16) page. 5.2.6 Abnormality (Figure 17) ：Select (Figure 9) Abnormality icon, get into (Figure 17) page. Event Type：Optional: No Disk, Disk Error, Disk No Space, Net Disconnection, IP conflict…etc.

  • Page 23: Intellingent

    H-DX User Manual 5.2.7 Intellingent (Figure 18) (Figure 19) ：Select (Figure 9) Intelligent Analysis icon, get into (Figure 18) page. Channel：setup ch1~ ch 16 for individual settings, also can setup for all channels. Enable：Select to setup for Intelligent functions; default value is Off. Algorithm：3 options:Perimeter alert, Items care, Video Diagnosis.

  • Page 24: System

    H-DX User Manual Tour：Channel pops out after Intelligent Analysis is triggered. If select all channels, it jumps from Ch 1 to ch16 in sequence; default value is Off. PTZ Activation：Set the PTZ function from Ch1 ~ Ch16, like (Figure 12). Record Delay：The recording duration after the buzzer being triggered Intelligent Analysis.

  • Page 25: General

    H-DX User Manual 5.3.1 General (Figure 21) (Figure 22) (Figure 23)

  • Page 26: Encode

    H-DX User Manual ：Select (Figure 21) General icon, get into (Figure 21) page. System Time：Setup current Year, date & time. Date Format：Time format setup, set up of YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, the default value is YYYY/MM/DD. Date Separator：Options: , date presents by selected symbol; The default value is Time Format：Set: 24-HOUR or 12-HOUR;...

  • Page 27: Network

    H-DX User Manual Channel：setup ch1~ ch16 for individual settings, also can setup for all channels. Compression：H.264 & extra stream, H.264 for DVR recording model, extra stream for web or smart phone monitor mode. Resolution：H.264 Resolution for device playback : CIF(352x240)、 HD1(704x240)、D1(704x480), Resolution for Extra stream : QCIF(176x120)、CIF(352x240).

  • Page 28: Netservice

    H-DX User Manual IP Address：Input correspondence IP address; default value is 192.168.1.10. Subnet Mask：Input correspondence Subnet Mask; default value is 255.255.255.0. Gateway：Input correspondence gateway; default value is 192.168.1.1. Primary DNS：Input primary DDNS server; default value is 192.168.1.1. Secondary DNS：Input secondary DDNS server; default value is 8.8.8.8. Media Port：Input Media Port;...

  • Page 29: Gui Display

    H-DX User Manual Mobile Monitor：Monitoring DVR via mobile phone, default PORT is 34599; default value is On. UPNP：Set UPNP; default value is Off. WiFi：Connect USB dongle to receive WiFi signal; default value is Off. RTSP：Input RTSP_PORT; default value is 554. 5.3.5 GUI Display (Figure 27) (Figure 28)

  • Page 30: Ptz Config

    H-DX User Manual Resolution：Adjust the resolution for VGA & HD OUT, default value is VGA, 1920*1080. Channel：Select ch1 ~ ch16. Region Cover：Choose which channel to display after selected, Ch 1 to 4, and assign positions. Time display & Channel Title：Adjust the positions of time display and channel title.

  • Page 31: Rs232

    H-DX User Manual 5.3.7 RS232 (Figure 30) ：Select (Figure 20) RS232 icon, get into (Figure 30) page. Function：5 options can select; default value is NONE. Baud rate：8 options can select; default value is 115200. Date Bits：4 options can select; default value is 8. Stop Bits：2 options can select;...

  • Page 32: Spot Set

    H-DX User Manual View 1：Set single screen for each switch tour; default value is All open. View 4：Set 4 screens for each switch tour; default value is All open. View 8：Set 8 screens for each switch tour; default value is All open. View 9：Set 9 screens for each switch tour;...

  • Page 33: Digital

    H-DX User Manual 5.3.10 Digital Main Menu/  System/Digital ： Set channel  mode. User can set the channel model here. a). Channel Type：When setting resolution of cameras, ANALOG means analog cameras, NETWORK means IP cameras. Choose “Channel Type”, you will have the following different setting views: 4CH models;...
  • Page 34 H-DX User Manual 3) VDH-DXB576 models 4) VDH-DXC816 models...
  • Page 35 H-DX User Manual 5.3.10.1 Normal recording: Only analog cameras need to be recorded.  In the 4CH ChannelType, choose different modes to record videos of different resolutions. For example, choose 960H_4CH mode to record 4 channel 960H videos. And maximum tunnel of replay supported is shown below.
  • Page 36 H-DX User Manual 16CH( VDH-DXB576)  In the DXB576_16CH Channeltype, choose different modes to record videos of different resolution. (960H recording is not real-time here.) For example, choose D1_16CH mode to record 16 channel D1 videos.And maximum tunnel of replay supported is shown below. After clicking OK, the DVR will request to reboot the system.
  • Page 37 H-DX User Manual 5.3.10.2 Hybrid recording: Both analog cameras and IP cameras need to be recorded.  In the 4CH ChannelType, choose different analog/IP combination (modes) to record videos of different resolutions. For example, choose Analog D1_2CH/Network1080P_1CH、 720P_1CH mode to record 2 channel D1, 1CH 1080P and 1CH 720P videos.
  • Page 38 H-DX User Manual Digital channels  Main Menu/  System/Digital/ Digital channels ：You can set the  target IP cameras or DVRs that you want to record. Channel: Set the NETWORK channels one by one or set all channels at once to have the same settings. Enable: Check it to enable the setting function.
  • Page 39 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose  “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 40 H-DX User Manual  In the 8CH ChannelType, choose different analog/IP combination (modes) to record videos of different resolutions. For example, choose Analog D1_2CH/Network1080P_1CH、 720P_1CH mode to record 2 channel D1, 1CH 1080P and 1CH 720P videos. And maximum tunnel of replay supported is shown below. After clicking OK, the DVR will request to reboot the system.
  • Page 41 H-DX User Manual Digital channels  Main Menu/  System/Digital/Digital channels ：You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channels at once to have the same settings. b).
  • Page 42 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose  “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 43 H-DX User Manual 16CH(VDH-DXB576)  In the DXB576_16CH ChannelType, choose different analog/IP combination (modes) to record videos of different resolutions. For example, choose Analog D1_4CH/Network1080P_1CH、720P_3CH mode to record 4 channel D1, 1CH 1080P and 3CH 720P videos. And maximum tunnel of replay supported is shown below.
  • Page 44 H-DX User Manual Digital channels  Main Menu/  System/Digital/Digital channels ：You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channels at once to have the same settings. b).
  • Page 45 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose  “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 46 H-DX User Manual 16CH(VDH-DXC816)  In the C816_16CH ChannelType, choose different analog/IP combination (modes) to record videos of different resolutions. For example, choose Analog 960H_8CH、 720P_8CH mode to record 8 channel 960H and 8CH 720P videos. And maximum tunnel of replay supported is shown below.
  • Page 47 H-DX User Manual Digital channels  Main Menu/  System/Digital / Digital channels ： You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channels once to have the same settings. b).
  • Page 48 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose  “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 49 H-DX User Manual 5.3.10.3 NETWORK recording: Only IP cameras need to be recorded  In the 4CH ChannelType, choose different combination (modes) to record IP cameras of different resolutions. For example, choose D1_9CH mode to record 9 channel D1 videos.And maximum tunnel of replay supported is shown below.
  • Page 50 H-DX User Manual Digital channels  Main Menu/  System/Digital/Digital channels ：You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channel at once to have the same settings. b).
  • Page 51 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose  “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 52 H-DX User Manual  In the 8CH ChannelType, choose different combination (modes) to record IP cameras of different resolutions. For example, choose D1_9CH mode to record 9 channel D1 videos. And maximum tunnel of replay supported is shown below. After clicking OK, the DVR will request you to reboot the system.
  • Page 53 H-DX User Manual Digital channels  Main Menu/  System/Digital/Digital channels ：You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channels at once to have the same settings. b).
  • Page 54 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose  “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 55 H-DX User Manual 16CH(VDH-DXB576)  In the DXB576_16CH ChannelType, choose different combination (modes) to record IP cameras of different resolutions. For example, choose D1_16CH mode to record 16 channel D1 videos. And maximum tunnel of replay supported is shown below. After clicking OK, the DVR will request to reboot the system.
  • Page 56 H-DX User Manual Digital channels  Main Menu/  System/Digital/Digital channels ：You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channels once to have the same settings. b).
  • Page 57 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.
  • Page 58 H-DX User Manual 16CH(VDH-DXC816)  In the DXC816_16CH Channel Type, choose different combination (modes) to record IP cameras of different resolutions. For example, choose D1_24CH mode to record 24 channel D1 videos. And maximum tunnel of replay supported is shown below. After clicking OK, the DVR will request to reboot the system.
  • Page 59 H-DX User Manual Digital channels  Main Menu/  System/Digital/Digital channels ：You can set the  target IP cameras or DVRs that you want to record. a). Channel: Set the NETWORK channels one by one or set all channels once to have the same settings. b).
  • Page 60 H-DX User Manual  Remote access configuration Main Menu/  System/Digital/ Digital channels/ Remote access configuration ：Choose “Add” to do the Remote access configuration. Choose Search to find all available IP Cam/DVR and select which one to connect. a). Configure name: Edit device name. Default: chConfig01.

  • Page 61: Advanced

    H-DX User Manual 5.4 Advanced (Figure 35) ：Select (Figure 2) Advanced icon, get into (Figure 35) page. 5.4.1 HDD Manage (Figure 36) ：Select (Figure 35) HDD Manage icon, get into (Figure 36) page. Read/Write：Set HDD enable to Read & Write. Read Only：Set HDD enable to read only.

  • Page 62: Account

    H-DX User Manual 5.4.2 Account (Figure 37) ：Select (Figure 35) Account icon, get into(Figure 37) page. Modify User：Modify user accounts. Modify Group：Modify group accounts. Modify Pwd：Modify passwords. Add User：Add a new user account. Add Group：Sort accounts by groups. Delete User：Delete user accounts. Delete Group：Delete group accounts.

  • Page 63: Output Adjust

    H-DX User Manual Display how many current online users. 5.4.4 Output Adjust (Figure 39) ：Select (Figure 35) Output Adjust icon, get into (Figure 39) page. Adjust the position & brightness for display. 5.4.5 AutoMaintain (Figure 40) ：Select (Figure 35) AutoMaintain icon, get into (Figure 40) page. Enable to reboot the DVR and delete files after assigned time.

  • Page 64: Restore

    H-DX User Manual 5.4.6 Restore (Figure 41) ：Select (Figure 35) Restore icon, get into (Figure 41) page. Restore all values to default value. 5.4.7 Upgrade (Figure 42) ：Select (Figure 35) Upgrade, get into (Figure 42) page. Plug USB flash disk to upgrade selected files.

  • Page 65: Device Info

    H-DX User Manual 5.4.8 Device Info (Figure 43) ：Select (Figure 35) Device Info, get into (Figure 43) page. Key in the information for DVR. 5.4.9 Import/Export (Figure 44) ：Select (Figure 2) Info icon, get into (Figure 44) page.

  • Page 66: Info

    H-DX User Manual 5.5 Info 5.5.1 HDD Info Select this to show how many pcs for HDD and USB memory storage devices, as (Figure 45). (Figure 45) Select this to show the recording time for HDD, as(Figure 46). (Figure 46) ：Select (Figure 45) HDD Info, get into (Figure 46) page.

  • Page 67: Bps

    H-DX User Manual 5.5.2 BPS (Figure 47) ：Select (Figure 44) BPS icon, get into (Figure 47) page. Display the statistics of current image BPS. 5.5.3 LOG (Figure 48) ：Select (Figure 44) LOG icon, get into (Figure 48) page. Records of DVR LOG message.

  • Page 68: Version

    H-DX User Manual 5.5.4 Version (Figure 49) ：Select (Figure 44) Version icon, get into(Figure 49) page. Display current system version and serial no.

  • Page 69: Logout

    H-DX User Manual 5.6 Logout Logout current account and then can login another user account. Shutdown the device. Reboot the device. (Figure 50) ：Select (Figure 2) Logout icon, get into (Figure 50) page.

  • Page 70: Net Surveillance Web Ie

    H-DX User Manual NET Surveillance WEB IE Login IE browser After Keyin IP or DDNS, if password without setting in DVR device, just key in “admin” for login. After login, a message pops out to choose the monitor streams for main stream or subsidiary stream, default value is subsidiary stream.
  • Page 71 H-DX User Manual After login, monitoring images and select 1/4/9/16 screens.  Playback : Setting requested period of time to playback.
  • Page 72 H-DX User Manual  Alarm Log: Login in and then can search Alarm log messages.  Device Config：Setting the record selections. 1） Record：...
  • Page 73 H-DX User Manual 2） Alarm settings：Setting the alarm selections. 3） System settings：Setting the system selections.
  • Page 74 H-DX User Manual 4） Advanced：Setting the Advanced selections. 5） Info：Checking HDD information, Log, current version & device No.
  • Page 75 H-DX User Manual  Config Manager：Set the storage place for Recording Videos and photos, and alarm setting.  Log Out：Click to log out for current screen.
  • Page 76 FUHO TECHNOLOGY CO.,LTD. No. 30, Lane 726, Jinma Rd, Sec. 3, Chang Hua City, Taiwan 500. TEX:886.4.751.2881...

Table of Contents