Recording - Vacron Mobile Video Recorder User Manual

2-Channel Mobile Video Recorder
H. Recording
There are two modes of recording:
Continuous After the device is powered up, it automatically starts
recording continuously until it is powered off.
Emergency In the event of emergency, the device saves data from 1~3
minutes before and after the event. The footage is not
subject to rewrite from continuous recording. Emergency
recording may be activated manually or by G-sensor.
In continuous recording, the recording indicator (red) will flash at
normal speed. In emergency recording, the recording indicator will
flash at fast speed.
Continuous Recording
When the device is powered on, the
LCD screen will show a splash screen
and then the firmware version.
The device needs around one minute
to boot. During boot-up, the power
indicator (green) will flash. Then the
recording indicator (red) will flash to
indicate that recording is in progress
Power

Recording

GPS
10
User Manual
Splash Screen