Vacron Digital Video Recorder User Manual
  1. Manuals
  2. Brands
  3. Vacron Manuals
  4. DVR
  5. Digital Video Recorder
  6. User manual

Vacron Digital Video Recorder User Manual

4ch / 8ch h.264 digital video recorder
Hide thumbs Also See for Digital Video Recorder:
Table of Contents

Advertisement

Quick Links

 
4CH / 8CH H.264

Digital Video Recorder

USER MANUAL
2013 FEB V1.0
optional
TYPE2

Advertisement

Table of Contents
loading

Related Manuals for Vacron Digital Video Recorder

Summary of Contents for Vacron Digital Video Recorder

  • Page 1: Digital Video Recorder

      4CH / 8CH H.264 Digital Video Recorder USER MANUAL 2013 FEB V1.0 optional TYPE2...
  • Page 2   WARNING  Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine.  Do not touch the power plug or case with wet hands as this could result electric shock.

  • Page 3: Table Of Contents

      CONTENTS Specification ..................... 1 Front Panel ....................2 Installation ....................3 DVR Installation ..................3 System Operation ..................4 Display Setup ................... 6 Search ...................... 7 Main Menu ....................9 8.1 Camera Setup .................. 9 8.2 Record Setup ................. 10 8.3 Motion Detection ................

  • Page 4: Specification

    1. Specification Video Format NTSC Video Input 4 CH Input / BNC Audio Input 2 CH Input / RCA Video Output 1CH Output / BNC Audio Output 1CH Output / RCA XGA Output 800x600, 1024x768, 1280x1024, 1440x900 Display Mode Full Screen, 4CH Split Screen, Auto Switch, Picture in Picture Display Resolution 720 x 480 720 x 576...

  • Page 5: Front Panel

    2. Front Panel Power Indicator The LED lights on when power on. HDD Indicator The LED lights on when the HDD is written. To move up of the selection setting in the menu. Channel 1 Under the live viewing mode, channel 1 display. Channel select Single channel (1~4ch) and quad display in playback mode.

  • Page 6: Installation

    3. Installation TYPE 2: Network PC Monitor Output Video In 4CH Video Input (BNC) Video Out 1CH Video Output (BNC) Audio Out 1CH Audio Output (RCA) Audio In 2CH Audio Input USB 2.0 Port USB Mouse / USB backup or firmware update. DC12V Power Input RJ-45 Network Connection (for TYPE 2)

  • Page 7: System Operation

    Please refer to Display Setup - Live Viewing Mode for more information.  DVR Network installation (for TYPE 2) Please connect DVR to HUB or router by using RJ-45 network cable and make sure the DVR network indicator LED is on. (Please refer to Network Setup for further network setting information of using static IP, PPPoE or DHCP.
  • Page 8 Front Panel & Remote Menu Operation Mouse Operation Control Operation Select character from virtual keyboard [Up/Down/Left/Right] [Move Cursor] Keyin the select character [Enter] [Left Click] Exit the virtual keyboard [MENU] [Left Click]out of selection area Key Description of Virtual Keyboard Delete the previous character Switch to text input Enter key.

  • Page 9: Display Setup

    6. Display Setup There are 2 kinds of screen display mode: Live, Auto Switching .  Live Viewing Mode The DVR will go to the live viewing mode after boot up. There are 5 different status icon: ● : Record M: Motion Triggered L: Video Loss : Sound on/off ...

  • Page 10: Search

     Playback Operation Front Panel & Remote Setup Operation USB Mouse Control Fast Rewind [Fast Rewind] Fast Forward [Fast Forward] Step Forward [StepForward] Step/Pause [Step/Pause] Play 1x [Play] Stop [Stop] Digital Zoon None Drag by Left Click Derived Image None [Left click] 1~4 Single Channel Display [1~4 Channel]...
  • Page 11 Front Panel & Remote Setup Operation USB Mouse Controller Search [Enter] [Left Click] Select Channel [Up/Down] [Moving Cursor] Select Dates [Up/Down/Left/Right] [Moving Cursor] Playback [Enter] [Left Click] Return to Upper Menu [MENU] [Right click] or [Left click  No data: no color, data of alarm trigger: red color, normal record data: green color.

  • Page 12: Main Menu

    Last Page Mark all the events in this page BackUp  List all of recording data and click on one of record data to playback.  Backup Please click “BACKUP” to backup the selecting file to USB memory stick. 8. Main Menu Camera Record Motion...

  • Page 13: Record Setup

     Display Display the channel, set: On/Off  Camera Color Setup  Hue: 0~50  Brightness: 0~50  Contrast: 0~50  Saturation: 0~50  Buzzer Duration The buzzer ON duration when video loss.  Time Display Display the time in LIVE mode. Values: ON/OFF. 8.2 Record Setup ...
  • Page 14  Frame Rate Setup Setting of Frame Rate: NTSC: 0-30 frames/sec; PAL: 0-25 frames/sec.  Quality Setup Setting of recording quality: Values 1-5. The bigger value, the better quality.  Pre Record setting Pre Recording time when motion alarm. Values: 0-10 seconds.  ...

  • Page 15: Record Schedule

     Audio On/Off the sound effects.  Encode Mode Encoding of channel. Values: VBR or CBR.  Record schedule setup Always and Schedule Record.  Record Schedule Schedule Setup Operation Front Panel & Remote Controller USB Mouse Enter Select Item [Enter] [Left Click] Select Channel...

  • Page 16: Motion Detection

    8.3 Motion Detection  Channel Select the channel to set. COPY icon can copy the present setting to other channels.  Enable Enable/disable motion detection for each camera. Set: On/Off Sensitivity  Sensitivity level of motion detection. Set: 1~10. Higher value equal more sensitive.

  • Page 17: Network Setup (Type 2)

    8.4 Network Setup (TYPE 2)  Mode Set the connection method. Set: Static IP, DHCP, PPPoE. Media Port  Port used for stream media. Default is port 9000.  WEB Port Port used for web access. Default is port 80. ...
  • Page 18  DDNS setting HOST NAME DVR NAME  DNS1 First Domain Name Server, Default : 168.95.1.1  DNS2 Second Domain Name Server, Default :168.95.192.1  DDNS Enable/disable Dynamic Domain Name server. Values: On, Off.  DDNS Server DDNS Server, Values: 3322, dyndns, cctvdvr. When using DDNS server, HOST name, server name and account/password are required.

  • Page 19: Log Search

    30, 60 seconds. 8.5 Log Search  Log type Set conditions for searching: type and time range. Log type can be ALL, Operation, Motion Detection, and Video Loss.  Start/End time Set the search range (Year/Month/Day). Press [SEARCH] to search. Setup Operation Front &...

  • Page 20: Backup

    8.6 Backup  Channel Backup all channels or single channel 1-4.  Record Type Select all, normal or alarm.  Start/End time Select the backup range of time. Press Search to start searching. The record list will be shown if available and follow [Record list] to backup. Storage Device Choose  ...

  • Page 21: System

    8.7 System Time Setup Display System Information Password Language Audio System Maintenance 8.7.1 Time Setting TYPE 1: no Network TYPE 2: Network  Date/Time Select by using virtual keyboard.  Date Format Setup Set: YY/MM/DD, MM/DD/YY.  Time Format Setup Set: 24Hours, 12Hours.

  • Page 22: Hdd Setup

    8.7.2 HDD Setup  Format Format the selected HDD Format HDD  Overwrite Enable/Disable Overwrite, Values: On/Off. If Overwrite is enabled, the period can be set as 6, 12, 24, 36, 48, 72 hours and 7, 15, 30, 60 days. ...

  • Page 23: Display Setting

    Format USB Memory Stick 8.7.3 Display Setting  GUI Display GUI display mode can be VIDEO or VGA.  Video Switching Time Set the switching time when switching channels in video mode. Values: 1-99 seconds. (0 sec is Off)  VGA Switching Time Set the switching time when switching channels in VGA mode.

  • Page 24: System Information

     XGA Resolution XGA Resolution: 800x600, 1024x768, 1280x1024, 1440x900. 8.7.4 System Information Provide the firmware version, MAC address, HDD status…. 8.7.5 User Password TYPE 1: no Network TYPE 2: Network  Password Setup Enable/Disable password checking. Values: On/Off (Default) Administrator account/password can not be blank. And at least 4 characters for the password.

  • Page 25: System Language

    8.7.6 System Language  Language Values: Traditional Chinese and English. Auto rebooting after change.  Function Tip Show function tips below the menu items. Value: On/Off (Default). 8.7.7 Audio Setting  Audio Volume Set the volume of audio In/Out. Values: 1-10. (Default: 5)  ...

  • Page 26: System Maintenance

    8.7.8 System Maintenance  Auto maintenance: Set time for auto rebooting. Value: On/Off. Auto rebooting setting  F/W update Please plug the USB memory stick into the USB port on the DVR rear panel after download the new firmware to the USB memory stick.

  • Page 27: H264 Player Operation

    H264 Player Operation  Preface H264 Player software allows to playback the backup saving file from the DVR.  System Requirement Operating System: Windows 2000, XP, Vista, Windows 7. Program obtainment and installation  While user start to backup the file from DVR, the system will automatically copy the H264Player.exe file and recorded data to the backup device for example, an USB flash memory stick.
  • Page 28 Step 3: Select Additional Tasks Step4: Install Confirmation Step 5: Installation Complete  ...

  • Page 29: User Interface

     User Interface Open File Click Pause Click Stop Click Play 1x Click Fast Forward Click Slow Forward Click Capture the image (snap Click shot) to the host computer Volume Control Drag Rewind Click Step Forward Click Mark start time Click Mark end time Click...

  • Page 30: Cell Phone Monitoring Operation (Type 2)

    Cell Phone Monitoring Operation (TYPE 2)    JAVA Script surveillance: 1. The mobile Phone must support JAVA Script. 2. To download the JAVA software: open Internet Browser on the mobile phone, and enter the IP address of the DVR and add /viewer.jar at the end. Example: http://xx.xxx.xxx/viewer.jar.
  • Page 31 ■ Android Software install/setup procedure Before the installation, please check the ”Allow Non-market application” or “unknown source” checkbox in your mobile phone< PIC 1~2>. <PIC 1> < PIC 2> First method 1. First, please make sure the PC synchronize software had installed and activated in your Android mobile phone.
  • Page 32 <PIC 4> Method two You may copy the APK installation package to your mobile phone or memory card, and then install it through other software. 1. Copy the “Castillo player” software package to your mobile phone through USB or directly to SD memory card. 2.
  • Page 33 3. Run the AppInstaller program, install the APK software package from your SD memory card<PIC 7~8>. <PIC 7> <PIC 8> 4. After the installation, you may find the “Castillo Player” in your program list, click it to run the program<PIC 9>. <PIC 9>...
  • Page 34 5. Press the “Setup” button to setup the connection setting <PIC 10>. Enter your individual configuration<PIC 11>. <PIC 10> <PIC 11> 6. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting<PIC 12~13>. <PIC 12>...
  • Page 35 7. Press “Connect” button<PIC 14>, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established<PIC 15>.   <PIC 14> <PIC 15> 8. <PIC 16>Operate instruction below: Connect/Disconnect Set up Channel Display screen PTZ Zoom/aperture/focal Snap shot...
  • Page 36 ■ iPhone software install/setup procedure 1. Download the “Castillo player” in AppStore then install it to your IPhone. <PIC 1~6>   <PIC 1> <PIC 2> <PIC 3> <PIC 4> <PIC 5> <PIC 6>  ...
  • Page 37 2. Run the “Castillo Player” after installation<PIC 7>. Press “setup” button to setup the connection setting<PIC 8>. Enter your individual configuration then press “back” button to go back to the main screen<PIC 9>.     <PIC 7> <PIC 8> <PIC 9>  ...
  • Page 38 4. <PIC 12> Operate instruction below: Display screen Zoom/aperture/focal distance  PTZ direction control Channel  Connect/Disconnect Set up Snap shot Next page    Full screen      <PIC 12>   ...
  • Page 39 ■ Symbian Software install/setup procedure 1. Copy the Symbian player to your mobile phone or memory card; you may see the example below in the case of NOKIA. <PIC 1~5>                 <PIC 1> <PIC 2>...
  • Page 40   <PIC 6>    3. Before the installation, please make sure you had cancel the “Only Signed Application”, also cancel the “Connection credentials check” <PIC 7~11>.                 <PIC 7> <PIC 8> <PIC 9>  ...
  • Page 41                                                       <PIC 10> <PIC 11>  4. Enter the folder which you’d saved the live view software “fuho_20110221.sisx”, double click to install, follow the instruction to proceed <PIC 12~22>. ...
  • Page 42                       <PIC 18> <PIC 19> <PIC 20>          <PIC 21> <PIC 22>  5. After the installation, enter the “Installed Application” and you may see the “Castillo Player” inside <PIC 23~25>.   ...
  • Page 43   6. Click and run the Castillo Player program <PIC 26~27>.          <PIC 26> <PIC 27>   7. Press the “Setup” button to setup the connection setting. After setting complete, click the “Add to my favorite” button to save the setting. Press “Connect” button, it’ll connect to the DVR according to your setup <PIC 28~32>.
  • Page 44         <PIC 31> <PIC 32> 8. <PIC 33>Operate instruction below: Display Screen PTZ direction control  Zoom/ Aperture/ Channel Focal distance Connect / Disconnect Exit Snapshot Set up Full screen Next page Add to <PIC 33>  ...
  • Page 45 ■ Windows Mobile Software install/setup procedure 1. Please install “Microsoft ActiveSync” into the PC before installing CAB software. 2. Execute the Microsoft ActiveSync program in your PC first, and connect the Windows Mobile SmartPhone to PC via USB, then it’ll synchronize the SmartPhone and PC.
  • Page 46 5. Please disconnect the SmartPhone from your PC, and begin the installation below: 6. Execute the Castillo Player CAB install package from the File browser, you may find it in your mobile device folder <PIC 3~5>. <PIC 3> <PIC 4> <PIC 5>...
  • Page 47 <PIC 9> <PIC 10> 8. Run the Castillo Player program, press the “Setup” button to setup the connection setting. After setting complete, enter a name you prefer then click the “Add to my favorite” checkbox to save the setting. Press OK and Leave to go back to the main screen <PIC 11~14>.
  • Page 48 <PIC 14> 9. Press “Connect” button, it’ll connect to the DVR according to your setup, and you may see the DVR picture after the connection established <PIC 15~16>. <PIC 15> <PIC 16>  ...
  • Page 49 10. <PIC 17>Operate instruction below: Channel Connect/Disconnect Display screen PTZ direction Control snapshot Zoom/aperture/focal distance <PIC 17>  ...
  • Page 50  Blackberry Software Connect Procedure Blackberry RTSP Connect procedure: Verify Authentication, website address input format as below rtsp://(website address)/ch(channel number)?user=(user ID)&pwd=(user password) e.g. rtsp://f16.cctvdvr.com.tw:554/ch2?user=2222&pwd=2222 Mobile Webpage: Please enter the ID & password again after you login, or you’ll get black screen of permission denied as below:  ...

  • Page 51: Web Operation (Type 2)

     Operation System For Mobile Phone Application Version Mobile Phone Software CastilloPlayer(Android_1.5~2.1).apk Android 2.1、2.2、2.3 CastilloPlayer(Android_2.2~2.3).apk iPhone 3.x、4.x Castillo player WinMobile 6.5.x CastilloPlayer_5.0.3.CAB Symbian S60 v3 above CastilloPlayer_5.1.713.sisx Support RTSP BlackBerry None Protocol 11. Web Operation (TYPE 2)  Preface The Web Application Manager allows the user to remotely monitoring, playback, backup through the DVR.

  • Page 52: Live Mode

     User Interface  Login Page Please login user name and password from the setting of DVR end.   Live mode Start/Stop the Live Monitoring Click Record the Footage to Click Start recording or Stop recording (saving Computer path: Setup/Information) Click to snap shot the image (saving path: Snapshot the Image...
  • Page 53  Playback (1) Select Date Event Search (2)Click (3)Click Playback Click on pop up file list Fast Forward Click “Fast Forward” (Speed: 2X, 4X, 8X, 16X) Rewind Click “ Rewind” (Speed: 1/2, 1/ 4X, 1/ 8X, 1/ 16X) Step Forward Click “Previous”or “Step”...
  • Page 54  DVR Setting Cameras Please refer “Camera Setup” for more information Record Please refer “Record Setup” for more information. MotionDetection Please refer “Motion Detection” for more information.  ...
  • Page 55 Network setting E-MAIL Log search  ...
  • Page 56  System Setting Date/Time Setting HDD Management Display  ...
  • Page 57 System Information Account / password Audio Setting  ...
  • Page 58 System Maintenance  Host setting  ...

  • Page 59: Default Setting

    12. Default Setting Item Default Setting Item Default Setting Channel Overwrite HDD Setup Resolution Normal Pack Time 60 Mins Frame Rate Real-time Date Format YY/MM/DD Record Quality Highest Time Format 24 Hours Setup Time Setup Audio Disable Time Zone GMT+08:00 Schedule Always Daylight Saving...
  • Page 60    ...

This manual is also suitable for:

4ch / 8ch h.264 digital video recorder

Table of Contents