4.3.2
68-pin connector type 16-bit SCSI model (NP model)
(1)
Connectors
Figures 4.15 show the locations of connectors and terminals on the 68-pin connector type 16-bit
SCSI model (NP model).
•
Power supply connector
•
SCSI connector
•
External operator panel connector
Power supply
connector (CN1) External operator panel
connector (CN1)
(2)
SCSI connector and power supply connector
a. 16-bit SCSI
The connector for the SCSI bus is an unshielded P connector conforming to SCSI-3 type which
has two 34-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.16 shows the SCSI
connector. See Section B.2 in Appendix B for the signal assignments on the SCSI connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3
"Physical Requirements" and Section 1.4 "Electrical Requirements" of the SCSI Physical
Interface Specifications.
C141-E229
SCSI connector (CN1)
Figure 4.15 NP connectors and terminals location
External operator
panel connector
(CN2)
4-13