Fujitsu MAX3147NC Maintenance Manual page 29

The formatted capacity can be changed by changing the logical block length and using spare sector
(*1)
space. See Chapter 3 for the further information. The formatted capacity listed in the table is an
estimate for 512 bytes per sector.
1GB=1,000,000,000 bytes
(*2)
The seek time is as follows:
(*3)
The start time is the time from power on or start command to when the HDD is ready, and the stop
(*4)
time is the time for disks to completely stop from power off or stop command.
This value indicates during idle mode. Power supply at nominal voltage ± 1%. 25 ° C ambient.
(*5)
Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.
(*6)
5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.
(*7)
1 on 1 connection case.
(*8)
1 host, 15 devices case.
(*9)
The maximum data transfer rate may be restricted to the response speed of initiator and by
(*10)
transmission characteristics. 1MB/s=1,000,000 bytes/s.
Refer to 1.1(13).
(*11)
1MB=1,048,576 bytes
(*12)
C141-E229
Seek Difference [4096 Cyl/div]
2-3