Maintenance Requirements - Fujitsu MAX3147NC Maintenance Manual

1. Always ground yourself with a wrist strap connected to ground before
handling. ESD (Electrostatics Discharge) may cause the damage to the
device.
2. To prevent electrical damage to the disk drive, turn the power off before
connecting or disconnecting a cable, connector, or plug.
3. Do not remove a PCA.
4. Do not use a conductive cleaner to clean a disk drive assembly.
5. Ribbon cables are marked with a colored line. Connect the ribbon cable to a
cable connector with the colored wire connected to pin 1.
6.2.2

Maintenance requirements

(1) Preventive maintenance
Preventive maintenance is not required.
(2) Service life
See "(3) Service life," in Section 2.1.5.
6-6
CAUTION
C141-E229