Features; Overview - Fujitsu D2542 Tehnical Manual

3

Features

3.1

Overview

There are two versions of the system board D2542 with the part numbers
S26361-D2542-A10 (SAS version) and S26361-D2542-B10 (SATA version).
The two versions differ in the chipset and connectors assembling.
Processors
®
– One Intel Xeon processor, Quad Core, Dual Core or Single Core or a
Conroe-L Single processor with 800/1066/1333 MHz Front Side Bus, socket
775
– second level cache depending on the processor
Main memory
– Up to 4 slots for main memory DDR II 800 (PC2-6400) SDRAM unbuffered
– Maximum 16 Gbyte of memory
– Memory modules for 512 MB, 1 GB, 2 GB and 4 GB
– Supports dual-channel DDR2 interface with interleaved mode.
– Supports ECC (Error Correction Code)
Chips on the system board
®
– Intel chipset:
– Bigby-P
– Southbridge: Intel
– Southbridge: Intel
– SAS-Controller LSI 1064E (only SAS version).
– On optional riser card:
– 2 x PCI express x8
– Super I/O SMSC 5027
– Dual Gigabit LAN controller: Broadcom 5715 C
– iRMC onboard Server Management and graphic controller
– BMC Kronos II iRMC
D2542 (RX100 S5)
®
ICH9-R (SATA)
®
ICH9 (SAS)
Technical Manual 13