Fujitsu D2542 Tehnical Manual page 22

LEDs
The LEDs have the following meaning:
LED
A - GEL
(Global Error
LED)
B - CSS
(Customer Self
Service)
C - Identification blue
D - memory
E - system/fans
F - CPU
G - Controller
If the server has been powered off (power-plugs must be disconnected) it is
possible to indicate the faulty component by pressing the indicate CSS button.
22
Indicator Meaning
red indicates a prefailure
red flashing indicates a failure. Reasons for a failure
may be:
- overheating of one of the sensors
- sensor defect
- fan defect
- CPU error
- Software detected an error
yellow indicates a prefailure
yellow flashing indicates a failure
server is identified via ServerView
orange memory module failure
orange fan failure
orange CPU failure
orange controller failure
Technical Manual
Features
D2542 (RX100 S5)