On-Screen Display Operation (Osd) - I-Tech NPW617X User Manual

< 2.2 > On-screen Display Operation ( OSD )
A V <
(T) All the LED touch buttons will automatically turn off after 10 minutes of idle status
©
(T) Picture
Picture mode :
Brightness :
Contrast:
Hue:
Saturation :
Picture size :
Color temp :
Noise reduce :
Sharpness :
Membrane Switch
6
nczi
DCZI
>
S>
Remark : All LED touch buttons in WHITE light.
The LED of Power ^ ) touch button will flash continuously when there is
no signal input.
( except the Power ((Jj ).
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except
the Power ft ).
Standard / Vivid / Soft / User mode to choose
Adjust background black level of the screen image
Adjust the difference between the image background
(black level) and the foreground (white level)
Adjust the screen hue value
Adjust the saturation of the image color
Adjust the image size
Standard / Cool / Warm / User to choose
Reduce the noise of the image
Adjust the image from weak to sharp
Function
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed control
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
P.6
Brightness
Contrast
Hue
Saturation
Picture size
Color temp
Noise reduce
Sharpness