Manage Accounts; View User; Create User; Delete User - MicroBoards Technology Flash Duplicator Series User Manual

Microboards Technology, LLC

Manage Accounts

The Manage Accounts menu includes optional
User functions that allow you to limit access to the
duplicator.
You must either log in as the Admin user or have
the Password on Bootup setting as NO if you
want to access the Manage Accounts menu.
You will be asked for the password when you enter the Manage Accounts menu. The default
password is 0000, which should be changed if you plan on using the user account security
features. If you are using the Password on Bootup option, be sure to keep a separate
record of the Admin account password!

View User

This function allows you to see the list of available user accounts. Use the ▼▲ buttons to
scroll through the user list.

Create User

Use the Create User function to add a new user account.
You will first be asked to enter in the new user name. Use the ▼▲ buttons to select the first
character, then press ENT to move to the next, or ESC to move to the prior character. You
can enter in up to 7 characters. After the 7
is on OK.
Next, enter the user's password. The password is limited to numerals, and will be 4 digits
long. Again, use the ▼▲ buttons to change the number of the current digit, pressing ENT
when the number is correct. After the 4
OK. The display will briefly show that the user has been added.

Delete User

The Delete User is used to remove users account from the list. The Admin user account
cannot be deleted.
Use the ▼▲ buttons to scroll through the list of existing users. When the display is showing
the user you want to remove, press the ENT button. You will be asked to verify that you want
to remove the user; press ENT if you do, or ESC if it is not the correct user to delete. The
display will briefly show that the selected user has been deleted.

Password on Bootup

To use the Managed Accounts Users to limit access to the duplicator, you must turn the
Password on Bootup setting to YES. This will take effect the next time the duplicator is
turned on.
You must use either the Save function in the Utilities menu or the Shutdown function prior
to turning the duplicator off, or changes you have made to the accounts may not be saved!

Shutdown

When turning off your Copywriter Flash Duplicator, it is highly recommended that you do so using
the Shutdown menu option. Not only does this function save any system settings that you may
have changed in the Setup menu, it also shuts down the duplicator components in a safe way.
When the display reads Ready to Power OFF after selecting the Shutdown function, you can use
the power switch on the front.
12
ENT
8. Manage Accounts
1. View User
▼
2. Create User
▼
3. Delete User
▼
4. Password on
Bootup
th
character is entered, press ENT when the cursor
th
digit is entered, press ENT when the cursor is on
ENT
Use this option to review the user
information that has already been added.
ENT Use this menu option to add a
new user.
Use this menu to remove a user from the
ENT
list. After a user account is deleted, that
user account will no longer have access
to the duplicator.
ENT
Use this menu to turn the security on or
off.