Status Leds - Allied Telesis AT-FS232 Installation Manual

Status LEDs

Table 2 defines the LEDs for the AT-FS232 and AT-FS232/x Series Bridging
Converters.
LED Color
PWR Green
AUTO NEG Green
OFF
100M Green
OFF
LNK Green
Blinking
FD/COL Green
OFF
Blinking
Mode Status
ML Green
SML Green
LT Green
AT-FS232 and AT-FS232/x Series Installation Guide
Table 2 Status LEDs
Description
Power is applied to the unit.
Auto-negotiation on the twisted pair port is enabled.
Auto-negotiation on the twisted pair port is disabled.
The twisted pair port is operating at 100 Mbps.
The twisted pair port is operating at 10 Mbps.
A valid link has been established on the port.
Data is being received or transmitted on the port.
The bridging converter is operating in full-duplex mode.
The bridging converter is operating in half-duplex mode.
Collision are detected on the port.
MissingLink is enabled.
Smart MissingLink is enabled.
Link Test is enabled.
7