Table of Contents
Advertisement
• Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
• Clean the oven cavity with a soft and
damp sponge.
WARNING!
Do not attempt to clean the cata-
lytic surface with oven sprays,
abrasive cleaners, soap or other
cleaning agents. This will dam-
age the catalytic surface.
Removing the shelf supports
1
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point
to the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.
2
Discolouration of the catalytic
surface has no effect on the cata-
lytic properties.
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
11.3 Cleaning the top oven
glass panels
The door glass on your product
can be different in type and
shape from what you see in dia-
grams. The number of glasses
can be different.
ENGLISH
29
Hide quick links:
Advertisement
Table of Contents
