D-Link DCS-3411 Quick Install Manual

D-link dcs-3411 fixed day & night network camera; dcs-3430 wireless n fixed day & night network camera
Hide thumbs Also See for DCS-3411:

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-3411

  • Page 2: System Requirements

    Fixed Day & Night Network Camera (DCS-3430 only) CD-ROM with Manual and Camera Mounting Bracket Setup Wizard 12V Power Adapter CAT5 Ethernet Cable If any of the above items are missing, please contact your reseller. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 3: Hardware Overview

    Ethernet cabling. This network port supports the NWay protocol, allowing the Network Camera to automatically detect or negotiate the transmission speed of the network. The Ethernet port can also be used to power the camera using a PoE switch (DCS-3411 only). D-Link DCS-3411/3430 Quick Install Guide...
  • Page 4 (CCTV) for both analog and digital video streaming purpose. Microphone Connector The DCS-3411/3430 Day & Night Network Camera has an internal microphone built-in. However, you have the option of using an external microphone by plugging it into the microphone connector.
  • Page 5 Hardware Overview I/O Connector The DCS-3411/3430 provides a terminal block with three pairs of connectors situated on the back panel. Two pairs are for input and the other is for output. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices.
  • Page 6 The Camera supports additional DC-Iris lens, and provides the power and control signal required for adjusting the lens through this DC-Iris connector (4-pin). You can attach any standard DC-Iris lens (optional) for a specific purpose, such as outdoor applications. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 7: Hardware Installation

    Environmental factors will adversely affect wireless signal range. Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the Network Camera’s back panel and attach it to the network. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 8: Network Camera

    Connect Using Power-Over-Ethernet (DCS-3411 only) Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3411 will turn green to indicate a proper connection and power to the unit. Attach the External Power Supply If you are not using Power-over-Ethernet, attach the external power supply to the DC power input connector located on the Network Camera’s back panel...
  • Page 9: Software Installation

    Software Installation Software Installation Insert the DCS-3411/3430 CD into the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Start > Run. In the Run command box type “D:\DCS-3411_3430.exe”, where D: represents the drive letter of your CD-ROM. If it does start, proceed to the next screen.
  • Page 10 Software Installation To start the installation, click Next. Note: The installation may take several minutes to complete. Click Next Click Finish to complete the installation. Click Finish D-Link DCS-3411/3430 Quick Install Guide...
  • Page 11 Configuration Configuring Your Camera with the Setup Wizard Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Click D-Link Setup Wizard SE The Setup Wizard will appear and show the MAC address of the DCS-3411/3430 and an IP Address (which may or may not be correct depending on what you have your DCS-3411/3430 connected to).
  • Page 12 Click Next Select DHCP if you want to obtain a new IP address every time the camera boots up. Click Next Select static IP to use the same IP address at each boot up. Click Next D-Link DCS-3411/3430 Quick Install Guide...
  • Page 13 Click the button labeled Link to access the web configuration. The Setup Wizard will automatically open your web browser to the IP address of the DCS-3411/3430, in this example it is: http://192.198.0.185. Your DCS- 3411/3430 may have a different IP Address.
  • Page 14 This section shows your camera’s live video. You can select your video profile and other options; such as Snapshot, Recording, etc. For more information on using the web configuration, please refer to the user manual. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 15 D-ViewCam Installation D-ViewCam software is included for the administrator to manage up to 32 D-Link IP cameras remotely. The administrator can also record the video to hard drive and configure advanced settings. D-ViewCam is a complete manage- ment tool and includes all configurative settings.
  • Page 16 Click Browse if you would like to choose a specific folder for the installation, otherwise click Next to continue. Click Next Click Next to start the installation. Note: The D-ViewCam installation process may take several minutes to complete. Click Next D-Link DCS-3411/3430 Quick Install Guide...
  • Page 17 DViewCam Installation Click Finish to complete the installation. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 18: Add A Camera

    Use Admin as the default user name and leave the password blank. Click the ( C h e c k Box) to continue. The D-ViewCam screen will appear as shown below. Click (Next) begin the Add Camera wizard. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 19 If you choose Add Manually, enter the IP address or domain name, http port, model name, camera ID and password. Click the “?” button to auto detect the camera’s model name, then the model name will appear in the Model Name box. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 20 (06:00 PM to 08.00 AM), and ONLY record when motion is detected. Note: Except 24/7 Continuous Recording, the other schedule recording type can be activated ONLY when image motion detection window is created. Please refer to the users manual for more information. D-Link DCS-3411/3430 Quick Install Guide...
  • Page 21 System Requirements Select Yes to add another camera, or select No to continue. Note: After you have finished adding your camera(s), click Close to view your camera(s). Your D-ViewCam Installation is Complete! D-Link DCS-3411/3430 Quick Install Guide...
  • Page 22 Notes Notes D-Link DCS-3411/3430 Quick Install Guide...
  • Page 23 Notes Notes D-Link DCS-3411/3430 Quick Install Guide...
  • Page 24: Technical Support

    Copyright ©2009 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and draft 802.11n specifications.

This manual is also suitable for:

Dcs-3430

Table of Contents