Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
FUNCTION MENU
Selected characters
Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Reset
34
On
(off the function)
This moves the picture around the screen in small amounts, at set
intervals, to reduce the residual image. This is where stationary objects,
such as screen logos, leave a slight image visible after they should have
disappeared.
This is used to reduce the residual image that can occur with stationary
pictures by the white field signal. Select On (continuous operation) or 60
60Min.
Min. (time limit operation) and press the OK button. Press the MENU or
RETURN button on the remote control to return to normal viewing.
This turns the gray sidebars to the black sidebars when watching normal
mode screen size area. It is always set to Off when the monitor powered
On. It is recommended to set to Off to reduce the residual image.
This is used to reduce power consumption for video input when there is
no video signal. Setting it On will lead the monitor to the standby mode
when the AV input with no signal is selected.
This selects the display condition of the FREEZE mode between Split (2
pictures) and Strobe (12 pictures).
This selects the screen display size of TV input that appears first when
the main power turned on.
This original factory settings for the items of this Menu page can be
(waiting to reset)
restored by pressing the OK button.
Setup hint
Advertisement
Table of Contents
