Table of Contents
Advertisement
FUNCTION MENU
MENU
Selected characters
Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Reset
(off the function)
Panel Life
Mode Display
ID Number
Inverse
Standby White
Gamma
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set
Off
5Min.
10Min.
60Min.
40Min.
20Min.
On
60Min.
Off
On
(waiting to reset)
Normal
Extend 1
Extend 2
Off
On
1
2
3
4
7
6
5
On
60Min.
Off
15Min.
30Min.
120Min.
60Min.
2.2
2.8
Function
Screen Saver
OK
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Reset
Select
Function
Panel Life
Mode Display
ID Number
Inverse
Standby White
Gamma
Reset
Select
This moves the picture around the screen in small amounts, at set
intervals, to reduce the panel image retention. This is where
stationary objects, such as screen logos, leave a slight image visible
after they should have disappeared.
This is used to reduce the panel image retention that can occur with
stationary pictures by the white field signal. Select On (continuous
operation) or 60 Min. (time limit operation) and press the OK button.
Press the MENU or RETURN button on the remote control to return to
normal viewing.
This turns the gray sidebars On/Off when watching normal mode
screen size area. It is always set to Off when the monitor powered
On. It is recommended to set to Off to reduce the panel image
retention.
Optional (grayed out)
Optional (grayed out)
Optional (grayed out)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
This function is to suppress the contrast of the screen regardless of
the Contrast setting in the Picture Menu. By this control, power
consumption can be reduced or degradation of a panel can be
mitigated. The order of power consumption is Extend 2 < Extend 1 <
Normal.
If the Contrast setting is changed when this item is set to Extend 1 or
2, it will be changed to Normal automatically.
This can display the Input Signal Screen Display every time the input
mode and signal mode are changed.
Set to OFF if the Input Signal Screen Display is not needed when
switching signals.
Assigns ID nos. to the monitors so that they can be controlled
individually (up to 7 monitors can be controlled).
This function can change each level of RGB signal invert to reduce
the panel image retention. When this function is required to use,
select On (continuous operation) or 60Min. (time limit operation) and
press the OK button. And press the Menu or Return button to exit.
This function is also provided against the image retention. If time is
set for this item, the screen changes into the white pattern when the
monitor enters power save mode, and it will continue for the period of
setting time.
Normally set to 2.2.
Off
On 60Min.
Off
Off
Split
Panoramic
Reset
Set
Return
Normal
Off
1
On 60Min.
Off
2.2
Reset
Set
Return
Setup hint
19
Advertisement
Table of Contents
