Picture Freezing - Hitachi 37PD5000 User Manual

OPERATING INSTRUCTIONS (continued)
D / N
i +
MENU
-
OK
D V D
1 2
4 5
7 8
0
AV1 AV2

Picture Freezing

When the FREEZE button on the remote control is pressed, the screen transfers into the
freeze mode.
• There are two types of freezing screen mode, Split and Strobe. These are possible to select at the "Freeze
Mode" setting of the Function Menu.
• The Split mode will display 2 pictures from the same source on the screen with one active picture and the
other still.
• The Strobe mode will display 12 pictures with the last picture active, while other 11 windows are still.
• Pressing the FREEZE button again changes the screen back to the normal picture.
• This function is also available from video input mode besides TV mode. Refer to the table for Freeze function
as below:
Split Strobe
(
FUNCTION MENU
Refer to the page . (It is same to the Picture Menu of Optional Video Unit Function)
But 2 item is added and 5 items are deleted.
Selected characters
Freeze Mode
Default Zoom
Mode Display
ID Number
Inverse
Standby White
Gamma
I / II
A / B 2-4-12
P+
+
P-
FREEZE
FREEZE button
ZOOM
3
6
9
AV3 AV4
RGB1 RGB2
Split Strobe
Panoramic 4:3
Setup hint
This selects the display condition of the FREEZE mode between Split
(2 pictures) and Strobe (12 pictures).
This selects the screen display size that appears first when the power
turned on.
Not Available (grayed out)
Not Available (grayed out)
Not Available (grayed out)
Not Available (grayed out)
Not Available (grayed out)
[Split]
5
A B
[Strobe]
1 2 3 4
5 6 7 8
9 10 11 12
Active