Data Format; Channel Voice Message Control; Midi Show Control Go Command - High End Systems universal Controller User Manual Addendum

Data Format

This section describes the data format used by the commands described in this addendum.

Channel Voice Message Control

Control Change—used to set the Master Dim level:
1011nnnn 0ccccccc
where nnnn is the channel number 0 to 15,
ccccccc is the control number 0 to 63,
and
Program Change—used to play back a Preset:
1100nnnn 0ddddddd
where nnnn is the channel number 0 to 15
and

MIDI Show Control GO command

byte number
1
2
3
4
5
6
7
8
9
The preset number is one or two digits from 1 to 64. Digits are sent as ASCII characters; i.e., 30h
to 39h for the digits 0 to 9. Leading zeros are ignored; for example, preset 2 could be sent as 30h
32h, or simply 32h. Preset 15 would be sent as 31h 35h.
0ddddddd
ddddddd is the desired Master Dim level 0 to 99.
ddddddd is the preset number 1 to 64.
bit pattern description
11110000 (F0h) Start of System Exclusive
01111111 (7Fh) Universal Real-time SysEx ID
0ddddddd Device ID
00000010 (02h) MIDI Show Control Sub ID
00000001 (01h) General Lighting Command
Format
00000001 (01h) MSC Go Command
0ccccccc Cue number ASCII digit 1
0ccccccc Cue number ASCII digit 2
11111110 (F7h) End of System Exclusive
Addendum UN-1 Page 9