Setting The Control Number - High End Systems universal Controller User Manual Addendum

Setting the Control Number

A control number is required only for master dim.
1.
2.
3.
4.
5.
6.
Page 6
Power ON the controller or press the
below:
Press the <Menu> button, then use the arrow keys around the
menu option (it will blink).
Press the Adjust 1 arrow key. This displays a list of menu options which will be
<Down>
different depending on whether Show Control or Channel Control has been previously saved.
Do one of the following:
• If Contnum is one of the displayed options, use the arrow keys around the
to select Contnum (it will blink). Then see Step 5.
• If Contnum is not displayed, use the arrow keys around the
Control menu option if it is not already blinking. Then see Step 4.
Press the Adjust 1 arrow key. This displays two options: Show Control and Channel
<Down>
Control. Press the Adjust 1
press <Record> . This will save your selection and return you to the Main menu. Start with
Step 2.
Press the Adjust 1
<Down>
Use the Adjust 1 arrow keys to select the control number you wish to use (from 0 to 63), then
press . The control number does not need to be unique for this controller.
<Record>
<Select> button to return to the Main menu, shown
DIM READY PAGE
M
99 001
arrow key to select Channel Control (it will blink). Then
<Down>
arrow key. This displays the following menu:
MIDI CONTROL NUM
xxx
Addendum UN-1
<Menu> button to select the MIDI
<Menu> button
<Menu> button to select the