Table of Contents
Advertisement
Addendum to: Universal Controller Manual
Version 2.0
Insert this addendum into the Universal Controller User Manual v2.0
(November 1994). The information in this addendum replaces the section
titled "MIDI" on pages 4-9 and 4-10 of the Universal Controller manual.
Firmware version 2.04 for the Universal Controller introduces expanded MIDI control as a top-
level menu option. A summary of changes is listed below:
•
All MIDI setup has been moved to a separate MIDI menu item at the top level of the menu
system.
•
You can now select MIDI Show Control (MSC) commands or channel voice commands. Only
one form of control can be used at one time.
•
Channel voice messages, program change and control change have been added to preset
playback and master dim control, respectively.
•
(The use of MSC GO commands for preset playback remains the same.)
Before continuing, you should have properly configured the Universal controller, all fixtures and all
data cables as described in the manual. This addendum applies to MIDI setup only.
Contents
Initial Power-Up Menu .......................................................................................................... .....2
MIDI Menu Overview ............................................................................................................. ...2
Navigating in the MIDI Menu System ............................................................................... 3
Setting the MIDI Device ID (MSC Control) ..............................................................................4
Setting Master Dim and Playing a Preset (Channel Voice Control)...........................................5
Setting the Channel Number............................................................................................... 5
Setting the Control Number ................................................................................................ 6
Master/Slave Modes............................................................................................................. .......7
Master/Slave Modes and Preset Programming ................................................................... 7
Master/Slave/Neither Modes and MIDI Commands .......................................................... 7
Selecting Master, Slave or Neither Mode........................................................................... 8
Data Format.................................................................................................................... .............9
Channel Voice Message Control ........................................................................................ 9
MIDI Show Control GO command .................................................................................... 9
Addendum UN-1
Page 1
Advertisement
Table of Contents
