Table of Contents
Advertisement
Chapter 5
This chapter describes how to setup the access the router through the web browser. Please be noted
that in order to access the router's admin page, a computer must be connected to one of the LAN ports
on the router. The WLAN Broadband Router is delivered with the following factory default parameters
on the Ethernet LAN interfaces.
Default IP Address: 192.168.1.1
Default IP subnet mask: 255.255.255.0
WEB login User Name: admin
WEB login Password: admin
5.1
IP Configuration
In this section that user could configure the connection type of WAN port. Please check with your
Internet Service Provider about the essential connection parameter.
5.1.1
WAN Interface Setup
Select WAN under the IP Config menu. 11n Broadband Router supports 3 interfaces and 4 access
types. Follow the instructions below for each to set up accordingly.
Choose your WAN Interface and WAN type, and click Next, its associated settings will show up.
Advanced Configuration
40
Hide quick links:
Advertisement
Table of Contents
