Wireless Security Setup - CNET CBR-980 User Manual

Protection
Aggregation
Short GI
RF Output Power
Apply Changes
Reset
5.2.3

Wireless Security Setup

Here users define the security type and level of the wireless network. Selecting different methods
provides different levels of security. Please note that using any encryption may cause a significant
degradation of data throughput on the wireless link. There are five Encryption types supported:
"None", "WEP", "WPA (TKIP)", "WPA2(AES)", and "WPA2 Mixed".
1. Encryption -- WEP Key
1.1 Set WEP Key: This section provides 64bit and 128bit WEP encryptions and two different shared
extension to IEEE 802.11 that provides wireless access-point
communications among multivendor systems.
Please select to enable wireless protection or not.
Enable this function will combine several packets to one and transmit it. It
can reduce the problem when mass packets are transmitting.
Users can get better wireless transmission efficiency when they enable this
function.
Users can adjust RF output power to get the best wireless network
environment. Users can choose from 100%, 70%, 50%, 35%, and 15%.
& Click on Apply Changes to save the setting data. Or you may click on Reset
to clear all the input data.
key formats (ASCII and Hex) for wireless network.
64