5.3
NAT
5.3.1
Visual Server
The Virtual Server feature allows users to create Virtual Servers by re-directing a particular range of
service port numbers (from the WAN port) to a particular LAN IP address.
Item
Enable Port Forwarding
IP Address
Protocol
Port Range
Comment
Apply Change & Reset
Current
Port
Forwarding
Table
Delete Selected & Delete All
Reset
Select to enable Port Forwarding service or not.
Specify the IP address which receives the incoming packets.
Select the protocol type.
Enter the port number, for example 80-80 or 20-22
Add comments for this port forwarding rule.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
It will display all port forwarding regulation you made.
Click Delete Selected will delete the selected item. Click Delete All
will delete all items in this table.
Click Reset to cancel.
83
Description