Table of Contents
Advertisement
Item
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
802.1d Spanning Tree
Clone MAC Address
Apply Change & Reset
The default IP address is 192.168.1.1
Please enter the Subnet Mask address
Please enter the Default Gateway address for LAN interface.
Click to select Disabled, Client or Server in different operation mode
of LAN access point.
Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP
address from the range
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN. Select
enable or disable the IEEE 802.1d Spanning Tree function from
pull-down menu.
If your ISP asks you to enter a specific MAC Address, please input the
correct info at the column.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
56
Description
Hide quick links:
Advertisement
Table of Contents
