Table of Contents
Advertisement
6
After setting the route point, select "Done."
The route planning display reappears with the selected point added in the list.
The last setting is listed as the final destination.
Repeat step 4 to 6 to continue adding route points. Up to 10 route points can be set.
7
Select "Calculate Route."
The route calculation starts.
After the calculation is complete, the route confirmation display appears.
8
Select one of the following items.
Item
Go
Change Condition
Purpose
Starts the route guidance.
Changes the route calculation conditions.
29
continue to next page r
Advertisement
Table of Contents
