Replacing The Bezel - Dell PowerEdge T100 Series Hardware Owner's Manual

Figure 3-29. Removing the Bezel
4
1 alignment slot
3 bezel

Replacing the Bezel

1 Align the bezel with the chassis frame and slide it into position.
2 Secure the alignment tabs into their alignment slots.
3 Attach the two bezel release screws to secure the bezel to the system
chassis. See Figure 3-29.
4 Replace the processor fan. See "Replacing the Cooling Fans" on page 87.
5 Reinstall the heat sink and shroud assembly. See "Replacing the Processor"
on page 83.
6 Close the system. See "Closing the System" on page 47.
7 Reconnect the system to the electrical outlet, and turn on the system.
1
3
2
2 bezel release screws (2)
4 alignment tab
Installing System Components
97