Dell PowerEdge T100 Series Hardware Owner's Manual page 72

Figure 3-18. Removing and Installing an Expansion Card
1 expansion card
3 card retention door
7 Close the card retention door to secure the remaining card(s) in the
system. See Figure 3-18.
8 Close the system. See "Closing the System" on page 47.
9 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
10 Remove the card's device driver from the operating system.
72
Installing System Components
1
2 alignment guide
4 release tab
2
3
4