Dell PowerEdge T100 Series Hardware Owner's Manual page 68

• For connection to a SAS controller expansion card (SAS or SATA hard
drives), connect the data cable from the SAS controller card and the
power cable as shown in Figure 3-17. See "SAS Controller Expansion
Card" on page 74 for instructions about installing the card and
routing the cables.
Figure 3-16. Cabling a SATA Hard Drive to the Integrated SATA Controller
1 SATA_B data cable to system board
3 power cable to hard drive
68
Installing System Components
3
4
2 SATA_A data cable to system board
4 SATA data cable to hard drive
1
2