Tuner Playback; Tuning In Broadcast Stations; Automatically Presetting Fm Stations (Auto Preset) - Marantz M-CR503 User Manual

ENGLISH
Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
u/i 8 / 9
<ENTER>
<MODE> <INPUT>
[INPUT df]
[TIME/DISPLAY]
u
[o]
i
[CH-]
[TUNING-]
[TUNER]
16

Tuner playback

Tuning in Broadcast Stations

BUTTON
<BUTTON>
Connect the antenna beforehand (vpage 10).
[BUTTON]
1 Press
[TUNER]
2
• If the input source is set to something other than "TUNER", press
[TUNER]
to switch the input source to "TUNER".
2 Press [TUNER]
band.
GAbout the displayH
When "FM AUTO" is selected ........"AUTO" is displayed.
When "FM MONO" is selected ......"MONO" is displayed.
When "AM" is selected .................. The reception mode is not
3 Use
[TUNING –, TUNING +]
reception band.
When a station is received, the "TUNED" indication will light.
[NUMBER]
The input source can also be switched to "TUNER" using
<INPUT>
or .
[CLEAR/DEL]
n To tune automatically
Press and hold in
stations automatically.
• Stations whose signal is weak cannot be tuned in.
n To stop auto tuning
[MENU]
[TUNING –, TUNING +]
Press
[ENTER/MEMO]
[p]
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.
[CH+]
[TUNING+]
2
[RDS]
.
or <MODE> to select the reception
FM AUTO
AM FM MONO
displayed.
or to select the
<ui>
[INPUT df]
[TUNING –, TUNING +] <ui>
or to tune in
<ui>
or .
Automatically presetting FM stations
(Auto preset)
This unit can be preset with a total of 99, FM and AM broadcast
stations.
NOTE
Auto preset is not possible with AM broadcast stations.
n Auto presetting with the remote control
Perform this operation when tuned to an FM broadcast station.
Press or press
1 [MENU] <MODE>
seconds.
ui
2 Use to select "TUNER SETUP", then press
[ENTER/MEMO] , [p] or <ENTER>
ui
3 Use to select "FM AUTO PRESET", then press
, or
[ENTER/MEMO] [p] <ENTER>
4 Press or
[ENTER/MEMO] <ENTER>
ENTER" is fl ashing.
Broadcast stations are preset automatically.
Canceling auto presetting
2
[TUNER]
Press or .
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
NOTE
When FM auto preset is performed, the channel currently registered
as the FM auto preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.
for 3 or more
.
.
while "PRESET