Getting Started; Accessories; Main Features; Cautions On Handling - Marantz M-CR503 User Manual

ENGLISH

Getting started

Thank you for purchasing this Marantz product. To ensure proper
operation, please read this user guide carefully before using the
product.
After reading the guide, be sure to keep it for future reference.

Accessories

Check that the following parts are supplied with the product.
q
Remote control ........................................................................ 1
w
R03/AAA batteries ................................................................... 2
e
AC Power cord (Cord length: Approx. 2 m) ............................. 1
r
AM loop antenna ..................................................................... 1
t
FM indoor antenna .................................................................. 1
y
iPod stand ................................................................................ 1
u
User guide ............................................................................... 1
q e
t y
2

Main features

Incorporates 4 high-quality digital audio amplifi ers.
Incorporates a Bi-amp system to realize full
performance of the Bi-wiring speaker system.
Allows switching between Speakers A and B and
simultaneous playback on Speakers A and B.
Allows playback of iPod, iPhone and MP3/WMA
r
audio sources through use of the USB port on the
front panel.
Equipped with screw-in speaker terminals for
secure connections.
Stylish design that hides rear panel connection
terminals from view from above.
Provides 3.5 mm diameter external input jacks
on the front panel for easy connection to a digital
audio player.
M-XPort (Marantz-eXtension Port).
The unit has the M-XPort, a Marantz original innovation, which
boats excellent expandability.

Cautions on handling

• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
for long periods of time, be sure to unplug the power cord from the
power outlet.
• Proper ventilation
If the unit is left in a room full of smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving signals properly.
• About condensation
If there is a major difference in temperature between the inside of
the unit and its surroundings, condensation may form on parts inside
the unit, causing it to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in use.
• Moving the unit
Turn off the power and unplug the power cord from the power outlet.
Next, disconnect the cables connected to other system units before
moving the unit.

About this guide

n Operation buttons
The operations described in this guide are based mainly on remote
control operation.
n Symbols
This symbol indicates a reference page on which
v
related information is described.
This symbol indicates a supplementary information
and tips for operations.
This symbol indicates points to remember operations
NOTE
or function limitations.
n Illustrations
Note that the illustrations in these instructions may differ from the
actual unit for explanation purposes.