Connecting The Power Cord - Marantz M-CR503 User Manual

Connecting an antenna
n AM loop antenna assembly
Put the stand section
1
through the bottom of
the loop antenna from
the rear and bend it
Loop
forward. antenna
Insert the projecting part
2
into the square hole in
the stand.
n Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Standing alone
Use the procedure shown upper to assemble.

Connecting the power cord

Stand
Square
hole
Projecting
part
NOTE
• Only use the supplied power cord.
• Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC IN.
Nail, tack, etc.
Power cord (Supplied)
To household power outlet
(AC 230 V, 50/60 Hz)
ENGLISH
11