Basic Operations; Preparations; Turning The Power On; Before Playing A Disc - Marantz M-CR503 User Manual

ENGLISH

Basic operations

Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
u/i
<ENTER> 8 / 9
<MODE> <INPUT> ON/STANDBY
5
[INPUT df]
[TONE]
u
[o]
i
13
8
[CLOCK]
12
This section explains how to set the current time, and how to
playback a CD or tuner.
For other operations, see the sections below.
BUTTON
n MP3 and WMA fi les playback (vpage 21)
<BUTTON>
n iPod ® playback (vpage 23)
[BUTTON]
n Portable audio player playback (vpage 24)
n USB memory device playback (vpage 25)
5 1/ 3
n Setting the timer (vpage 26)
n Setting the speakers (vpage 28)

Preparations

Turning the power on

Press
ON/STANDBY
The power turns on. Press again to set the power to standby.
VOLUME df
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
ON/STANDBY
periods of time, either press
unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is
unplugged from the outlet.
• The settings made for the various functions may be cleared if the
VOLUME df
power cord is left unplugged from a power outlet for an extended
period of time.
[MENU]
[ENTER/MEMO]
[p]
9
.
ON/STANDBY
to turn off the power, or

Before playing a disc

Press .
1 ON/STANDBY
[INPUT df]
2 Press or to set the input source
<INPUT>
to "DISC".
If no disc is loaded "NO DISC" is displayed.
Insert a disc (vpage 3).
3
• Press 5 to open/close the disc tray.
• The disc tray also closes when 1 / 3 is pressed.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.

Turning the power off

Press .
ON/STANDBY
NOTE
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off
the power.
• Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the set.