Tuner Playback; Tuning In Broadcast Stations; Automatically Presetting Fm Stations (Auto Preset) - Marantz M-CR603 User Manual

ENGLISH
Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
o/p u/i
<ENTER>
<INPUT>
[TUNER]
[TUNING-] [TUNING+]
2
[CH df]
[MODE]
u
[ENTER/MEMO]
o p
i
[SEARCH]
[NUMBER]
16

Tuner playback

Tuning in Broadcast Stations

BUTTON
<BUTTON>
Connect the antenna beforehand (vpage 7).
[BUTTON]
1 Press [TUNER] to select the reception band.
2
Tune in the desired broadcast station. (FM/AM only)
2
When a station is received, the "
q
To tune in automatically (Auto tuning)
[MODE]
Press to light the "AUTO" indicator on the display, then
[TUNING –, TUNING +]
use
w
To tune in manually (Manual tuning)
[MODE]
Press to turn off the display's "AUTO" indicator, then
[TUNING –, TUNING +]
use
• If the input source is set to something other than "TUNER", press
[TUNER]
to switch the input source to "TUNER".
• The input source can also be switched to "FM" or "AM" using
<INPUT>
(vpage 12).
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING +] to change frequencies continuously.
• A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
n To stop auto tuning
[TUNING –, TUNING +]
Press
Automatically presetting FM stations
(Auto preset)
This unit can be preset with a total of 99, FM and AM broadcast
stations.
FM AM
Auto preset is not possible with AM broadcast stations.
" will light.
n Auto presetting with the remote control
1
to select the station you want to hear.
2
to select the station you want to hear.
Canceling auto presetting
Press
Broadcast stations whose antenna signal are weak cannot be preset
[TUNING –,
automatically. If you wish to preset such stations, tune them in
manually.
When the auto presetting operation is performed, the new presettings
overwrite the previous presettings.
n Giving station names to preset channels
.
1
2
3
4
NOTE
Perform this operation when tuned to an FM broadcast station.
Press [SEARCH] .
"Search" menu appears.
ui
Use to select "Auto Preset"-"Start", then press
p
[ENTER/MEMO] , <ENTER> or .
After "Searching" is displayed, "Complete" is displayed.
2
.
NOTE
Names of up to 8 characters can be input.
Tune in the preset channel you want to name.
Press and hold or
[ENTER/MEMO]
The display switches to the station name input display.
Input the station name.
"Inputting characters" (vpage 35)
Press or
[ENTER/MEMO] <ENTER>
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.
.
<ENTER>
.