Answering Machine Emulation; Notification Methods - Vodavi Digital telephone User Manual

14

Answering Machine Emulation

When a call is sent to your voice mailbox, you can press a
preprogrammed flexible button to listen to the caller leaving
the voice mail message. If you decide to speak with the caller,
you can press the preprogrammed button to be connected to
the caller.

Notification Methods

There are two methods of notification, a Ring Mode or a
Speaker Mode. These methods are controlled by the type of
flexible button assigned on the telephone.
The preprogrammed button type defines the operation mode
(654+0=Ring Mode, 654+1=Spkr Mode). An incoming CO call
rings at a station and forwards (except busy type) to the
station's VM mailbox.
Ring Mode
The preprogrammed flexible button flashes red while the caller
is in your mailbox. You can press the flashing button and the
audio is broadcast over the speaker of the keyset. The MUTE
key is also enabled and the LED lights solid red. When the call is
ringing the station in the ring mode, the display shows:
V M S CR E E N I NG RI N G
M M M DD Y Y
Answering Machine Emulation
H H : M M am