Voice Mail
5. Replace the handset, or press the ON/OFF button.
Retrieving Voice Messages
To enter the Voice Mail system to check for messages:
Either dial Voice Mail group number, press preprogrammed
VM GROUP flexible button, press flashing MESSAGE WAIT
button, or use the Soft Key's VM1 option (group 440 only).
You will be prompted to enter your mailbox password.
Voice Mail Transfer with ID Digits
While on a call and the caller on the other end wishes to leave a
Voice Message for another VM user:
1. At the initiating station, press the TRANS button.
2. Dial the Voice Mail Group number or press the
preprogrammed VM GROUP flexible button.
3. Dial VMID (mailbox location) of the desired party and go
on-hook.
Voice Mailbox Button
To program a Mailbox flexible button:
1. Press the SPEED button twice.
2. Press the desired flexible button to be programmed.
3. Dial the Mailbox feature code (460-467 = voice mail
groups 1-8; 468 = remote voice mail group).
4. Dial the VMID number.
SINGLE LINE TELEPHONE
Not applicable
Feature code 468 does not apply to
97
Mach I
systems.