Allocating The Minute Minder To A Specific Cooking Zone - Miele KM 3034 Operating And Installation Instructions

Minute minder

Allocating the minute minder to a specific cooking zone

26
You can set the minute minder for any active cooking zone.
All cooking zones can be programmed at the same time.
^ Switch on the desired cooking zone.
^ Touch the m sensor.
00 and the minute minder indicator lamp will flash in the timer
display.
^ Touch the m sensor again.
The minute minder indicator lamp in the timer display will go
out and one of the cooking zone indicator lamps will flash.
^ If several cooking zones are switched on, touch the m
sensor repeatedly until the indicator lamp flashes for the
cooking zone you wish to use this function for, e.g. back
right, flashes.
The indicator lights for the cooking zones which are switched
on light up anti-clockwise, starting with the front right.
^ Touch the - or + sensor until the time you require appears
in the display, e.g. 15 minutes.
The time set will then count down in minutes. The time
remaining will be shown in the timer display.
To set a switch-off time for a further cooking zone, proceed
as above.
If more than one switch-off time is programmed, the shortest
time remaining will show in the display, and the
corresponding indicator lamp will flash. All the other indicator
lights will light up constantly. If you want to check on the time
remaining for another zone, touch the m sensor repeatedly
until the indicator lamp for the zone you require flashes.