Easy Switch-Off Function; In-Operation/Residual Heat Indicator - Miele KM 3034 Operating And Installation Instructions

Operation

Easy switch-off function

In-operation/residual heat indicator

24
All active cooking zones can be switched off by touching the
easy switch-off sensor f.
^ Touch the f sensor.
The in-operation/residual heat indicators for active cooking
zones will flash.
A minute-minder time set will continue to run down, if it is not
allocated to a specific cooking zone. If it is allocated to a
specific cooking zone, it will be cancelled.
The control light for the easy switch-off function is lit up until
all active burner control dials are turned to "ß".
The in-operation/residual heat indicator lights up when the
hob is switched on and rmains lit during operation. If the
appliance is switched off, the indicator light goes out briefly
then lights up again as long as residual heat remains.
Do not touch or place any heat sensitive objects on the
gas hob while the residual heat indicator is still on. Danger
of burning and fire.
If the display is flashing, there is a fault. See section "Problem
solving guide".