Chapter 4 ZyXEL Utility - Windows
Table 7 Site Survey (continued)
LABEL
MAC address
Surveyed at
4.4.1 Security Settings
When you configure the NWD271N to connect to a network with wireless security activated
and the security settings are disabled on the NWD271N, the screen varies according to the
encryption method used by the selected network.
4.4.1.1 WEP Encryption
Configure WEP security in this screen.
Figure 29 Security Setting: WEP
The following table describes the labels in this screen.
Table 8 Security Setting: WEP
LABEL
Security Settings
WEP
Authentication
Type
Pass Phrase
Transmit Key
54
DESCRIPTION
This field displays the MAC address of the wireless device.
This field displays the time when the wireless device was scanned.
DESCRIPTION
Select 64 Bits or 128 Bits to activate WEP encryption and then fill in the related
fields.
Select an authentication method. Choices are Open and Shared.
Refer to
Section 3.3.1.1.2 on page 39
Enter a passphrase of up to 32 case-sensitive printable characters. As you enter
the passphrase, the NWD271N automatically generates four different WEP keys
and displays the first in the key field below. Refer to
for more information.
Select a default WEP key to use for data encryption. The key displays in the
adjacent field.
for more information.
Section 3.3.1.1.1 on page 39
NWD271N User's Guide