Creating And Using A Profile; Figure 13 Zyxel Utility: Profile; Figure 14 Zyxel Utility: Add New Profile - ZyXEL Communications NWD271N User Manual

Troubleshooting section of this User's Guide or contact your network administrator if
necessary.

2.3.2 Creating and Using a Profile

A profile lets you automatically connect to the same wireless network every time you use the
ZyXEL utility. You can also configure different profiles for different networks, for example if
you connect a notebook computer to wireless networks at home and at work.
This example illustrates how to set up a profile and connect the wireless client to an access
point configured for WPA-PSK security. In this example, the AP's SSID is "SSID_Example3"
and its pre-shared key is "ThisismyWPA-PSKpre-sharedkey". You have chosen the profile
name "PN_Example3".
1 Open the ZyXEL utility and click the Profile tab to open the screen as shown. Click Add
to configure a new profile.

Figure 13 ZyXEL Utility: Profile

2 The Add New Profile screen appears. The wireless client automatically searches for
available wireless networks, which are displayed in the Scan Info box. You can also
configure your profile for a wireless network that is not in the list.

Figure 14 ZyXEL Utility: Add New Profile

3 Give the profile a descriptive name (of up to 32 printable ASCII characters). Select
Infrastructure and either manually enter or select the AP's SSID in the Scan Info table
and click Select.
4 Choose the same encryption method as the AP to which you want to connect (In this
example, WPA-PSK).
NWD271N User's Guide
Chapter 2 Tutorial
33