Figure 66 Windows Vista: Advanced Tcp/Ip Properties - ZyXEL Communications NWD271N User Manual

11 The Advanced TCP/IP Settings window opens.

Figure 66 Windows Vista: Advanced TCP/IP Properties

12 If you do not know your gateway's IP address, remove any previously installed gateways
in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
13 On the IP Settings tab, click Add in the IP addresses category.
14 In the TCP/IP Address field, type an IP address in IP address and a subnet mask in
Subnet mask, and then click Add.
15 Repeat the above two steps for each IP address you want to add.
16 Configure additional default gateways in the IP Settings tab by clicking Add in Default
gateways.
17 In the TCP/IP Gateway Address field, type the IP address of the default gateway in
Gateway. To manually configure a default metric (the number of transmission hops),
clear the Automatic metric check box and type a metric in Metric.
18 Click Add.
19 Repeat the previous three steps for each default gateway you want to add.
20 Click OK when finished.
NWD271N User's Guide
Appendix A Setting Up Your Computer's IP Address
97