Figure 32 Security Setting: 802.1X - ZyXEL Communications NWD271N User Manual

Table 10 Security Setting: WPA/WPA2
LABEL
Certificate
PEAP Inner EAP
TTLS Protocol
Back
Next
Exit
4.4.1.4 IEEE 802.1x
Configure IEEE 802.1x security with various authentication methods in this screen.
The procedure to configure 802.1x is different in Windows Vista. See
4.7 on page 67
Vista.

Figure 32 Security Setting: 802.1x

NWD271N User's Guide
DESCRIPTION
This field is only available when you select TLS in the EAP Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
This field is only available when you select PEAP in the EAP Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
This field is available only when you select TTLS in the EAP Type field.
Select a TTLS protocol that the RADIUS server uses. Options are CHAP, MS-
CHAP, MS-CHAP-V2 and PAP.
Note: This feature is not available on Windows Vista.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Summary screen (refer
to Section 4.4.2 on page 59.)
Click Exit to return to the Site Survey screen without saving.
for information on setting up your NWD271N to use 802.1x in
Chapter 4 ZyXEL Utility - Windows
Section
57