Manual Tuning - Sangean ATS-303 User Manual

Manual tuning

Switch the appliance on,select a wave range and find your desired
station by pressing the TUNING
ting and the strength of the reception of the station is shown by the
signal lamp
19
The tuning process takes place as follows:
FM 100 kHz
MW 9 kHz or 10 kHz*
SW1/SW2 5 kHz
* Europe 9 kHz /USA and Canada 10 kHz
MW tuning grid
The tuning grid for the medium wave can be adjusted to 9 kHz or
10 kHz using the 9K/10K Switch
This switch can be found inside the battery compartment and must
be moved using a small screwdriver or similar instrument.
RADIO
TUNING.
keys repeatedly.The perfect set-
By pressing and holding one of
the keys ,you can manually
tune up to a desired frequency
display.
inside the battery compartment.
21
9