Advertisement
Application Guide
How to install:
Remove the Midas USB key from it's packaging and insert it into a USB port on your
computer. The Midas USB key contains software for both Mac and Windows operating
systems, so ensure you install the right version for your computer.
!
Do not connect the FireWire cable to the PC/Mac before installing the device driver.
Firstly, install the ASIO driver, which is the software application which connects the VeniceF to
your computer.
!
You must restart your PC/Mac before using the VeniceF driver you have just
installed.
Now install the RECORD application.
!
The VeniceF must be switched on before the FireWire cable is connected to it.
Power up the computer and the VeniceF. Connect a FireWire (1394) cable between the
VeniceF and your computer. The VeniceF has a FireWire 400 connector, you will need to use
a cable which has appropriate connectors on each end for the VeniceF and your computer.
Start the ASIO driver and check the Midas FW control panel dialogue window to ensure the
computer has detected the console. Select the desired clock speed, 44.1 or 48KHz. (default is
44.1KHz).
Start the RECORD application. You will be presented with a dialogue box.
Click "open in demo mode"
Important:
You will need an internet connection to register your RECORD software and also to
open and save files created with your registered account.
The software you are now viewing is a 60-day trial version of RECORD. It has all the
functionality of the full version, with the exception that you will be unable to re-open any of
your saved projects without first acquiring the full license from www.propellerheads.se
The RECORD User-interface consists of three screens. The mixer, the Rack and the recorded
tracks waveform view, referred to as the "sequencer". The three screens are navigated by
holding the FUNCTION key on your computer keyboard, and selecting F5, F6 and F7
respectively. Holding the function key and pressing F5, F6 or F7 twice, opens a split-screen
view in which the mixer and rack are both visible at the same time. The keyboard TAB key
rotates the rack to facilitate patching and some additional options available on the rear of the
virtual FX devices.
VeniceF
Application Guide
3
Advertisement
