JVC Everio GZ-VX755 Detailed User Manual page 81

Operation Buttons for Still Image Recording
.
Operation
Button
Video/Still Image
A
Mode
T/W Zoom
B
Playback Mode
C
Snapshot
D
Q
MENU
E
Display Button n
F
Recording Mode
G
P/H
Description
Switches between video and still image
modes.
Allows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
"Zooming" (A p. 82)
Switches to the playback mode.
Functions as the SNAPSHOT button.
However, focus cannot be set by pressing
halfway.
Displays the various menus of still image
recording.
"Operating the Menu" (A p. 171)
Switches the display between full (m) and
simple (n) with every tap of the button.
Simple display: Some displays
0
disappear after approximately 3
seconds.
Full display: Displays everything. The
0
display button changes from n to m.
When the power is turned off, simple
0
display (n) will be set.
Switches the recording mode.
Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such
as during a performance.
T appears when "SILENT MODE" is set to "ON".
0
" SILENT MODE " (A p. 199)
Useful Settings for Recording
When "QUICK RESTART" is set to "ON", this unit turns on immediately if
0
you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.
" QUICK RESTART " (A p. 200)
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
" AUTO POWER OFF " (A p. 200)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 98)
Caution :
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
0
bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well
0
as places exposed to steam or smoke directly.
While this unit may be used with the LCD monitor reversed and closed,
0
the temperature rises more easily. Leave the LCD monitor open when
using this unit in places exposed to direct sunlight or high temperatures.
The power may turn off to protect the circuit if the temperature of this unit
0
rises too much.
Do not remove the battery pack, AC adapter, or SD card when the access
0
lamp is lighted. The recorded data may become unreadable.
"ACCESS (Access) Lamp" (A p. 207)
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
Memo :
Before recording an important scene, it is recommended to conduct a trial
0
recording.
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Recording
81