Changing The Display Language; Holding This Unit; Tripod Mounting - JVC Everio GZ-VX755 Detailed User Manual

Changing the Display Language

The language on the display can be changed.
1
Tap "MENU".
.
When entering from the recording mode, tap "MENU" again as the
0
shortcut menu appears.
2
Tap "Q".
.
3
Tap "LANGUAGE".
.
Tap 3 or 2 to move upward or downward for more selection.
0
4
Tap to the desired language.
.
Tap 3 or 2 to move upward or downward for more selection.
0

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent
camera shake.
.
Hold the LCD monitor with your left hand and adjust the angle accordingly.
0
Holding the LCD monitor with your left hand helps to stabilize the camera
for recording.
Caution :
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is being used by
0
children.
Memo :
If camera shake is excessive, use the image stabilizer.
0
"Reducing Camera Shake" (A p. 107)

Tripod Mounting

This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.
.
To prevent this unit from falling off, check the tripod mounting screw holes
0
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
There is only one tripod mounting hole on this unit. As such, large tripods
0
that require two mounting holes cannot be used.
To prevent injuries or damages which may result if this unit falls off, read
0
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo :
It is recommended to use a tripod or monopod when recording in
0
conditions prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
Set the image stabilizer to b (OFF) when using a tripod for recording.
0
"Reducing Camera Shake" (A p. 107)
Getting Started
73