JVC Everio GZ-VX755 Detailed User Manual page 25

Necessary Settings
To send e-mails, the following settings are required.
*The above settings are not necessary if they have already been set for other
functions.
Registering an access point
0
"Registering the Access Points to Connect ("ACCESS POINTS")"
(A p. 36)
Setting the account for sending e-mails
0
"Setting the Sender's E-mail Address" (A p. 30)
Registering the recipient's e-mail address
0
"Registering the Recipient's E-mail Address" (A p. 33)
Selecting the Recipient's E-mail Address
o
1
Tap "MENU".
(Operation on this camera)
.
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap "VIDEO MAIL ATTN.".
(Operation on this camera)
.
4
Tap the e-mail address to be set as recipient.
(Operation on this camera)
.
An icon a appears beside the recipient's e-mail address.
0
After setting, tap "SET".
0
Settings will not be saved until "SET" is tapped.
0
Operation Method
1
Tap "MENU".
(Operation on this camera)
.
The shortcut menu appears.
0
2
Tap "VIDEO MAIL" (R) in the shortcut menu.
(Operation on this camera)
.
3
Start recording.
.
Recording starts after the countdown (5 seconds).
0
.
You can allow the recording to be performed for 15 seconds or press
0
the START/STOP button to stop.
4
Tap "SEND".
(Operation on this camera)
.
Sending of the video mail starts.
0
To check the file, tap "PLAY TO CHECK".
0
When it is complete, tap "OK".
0
Using Wi-Fi
25