Obtaining A Dynamic Dns (Ddns) Account; Setting Dynamic Dns (Ddns) On This Camera (Out Monitoring Set) - JVC Everio GZ-VX755 Detailed User Manual

Obtaining a Dynamic DNS (DDNS) Account

By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when it is connected to the internet.
Only the JVC dynamic DNS service can be set on this camera.
0
To obtain (register) an account, perform the following steps.
1
Access the following URL and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2
Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3
Set the username and password used in registration on the camera.
(Operation on this camera)
"Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING
SET)" (A p. 29)
4
Execute "OUTSIDE MONITORING".
(Operation on this camera)
If "OUTSIDE MONITORING" is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5
Tap "CAMERA NETWORK INFO." to check that the URL (WAN) is
displayed.
(Registration complete)
"Image Monitoring via the Internet (OUTSIDE MONITORING)"
(A p. 19)
Caution :
Registration will be canceled if you do not access the dynamic DNS server
0
from the camera within 3 days.
Perform the registration again in this case.
Registration will not be complete if the username and password set on this
0
camera are incorrect. Be sure to check that they are correct.
Successful registration will be canceled too if you do not access the
0
dynamic DNS server for 1 year.
Setting Dynamic DNS (DDNS) on this Camera (OUT
MONITORING SET)
Sets the dynamic DNS information of the obtained account on the camera.
1
Tap "MENU".
(Operation on this camera)
.
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap "OUT MONITORING SET".
(Operation on this camera)
.
4
Tap "DDNS SETTING".
(Operation on this camera)
.
5
Tap "DDNS", then tap "ON".
(Operation on this camera)
.
Using Wi-Fi
29